Intel S5000VSA manual Bootable CD-ROM Disk Is Not Detected, LED Information

•Make sure the drive is compatible. See “Additional Information and Software” for a link to the tested drives.

•Make sure you have not exceeded the power budget for the server. See “Additional Information and Software” for a link to software to check your power budget.

•If using SCSI drives, verify that each SCSI ID number is unique on the SCSI bus. See your drive documentation for details on setting the SCSI ID for your drives.

•If using ATA drives, verify that the master/slave settings are set correctly. See your drive documentation for details on setting the master/slave settings.

•If using a RAID configuration with SCSI or SATA drives, make sure the RAID card is installed correctly.

Bootable CD-ROM Disk Is Not Detected

Check the following:

•Make sure the BIOS is configured to allow the CD-ROM to be the first bootable device.

LED Information

The Intel® Server Board [ProductCode] includes LEDs that can aid in troubleshooting your system. A table of these LEDs with a description of their use is listed below.

Table 7. LED Information

LED Name	Function	Location	LED Color	Notes
Power	Indicates system power	Front control	Green	Off = Power is off or in sleep
	is on or off	panel		state S5
				On = Power is on or in sleep
				stats S0
ID	Aid in server	Front control	Blue	Press ID LED button or use
	identification from the	panel and		Server Management software
	back panel	board rear left		to turn the LED on and off.
		corner
System Fault	Visible fault warning	Control panel	Green or	Green = No Fault
		and board rear	Amber	Green blinking = degraded
		left corner
				condition
				Amber blinking = non-critical
				error
				Amber = critical or non-
				recoverable error

Intel® Server Board S5000VSA User’s Guide 45