First Steps Checklist

•Is AC power available at the wall outlet?

•Are the power supplies plugged in? Check the AC cable(s) on the back of the chassis and at the AC source.

•Are all cables correctly connected and secured?

•Are the processors fully seated in their sockets on the server board?

•Are all standoffs in the proper location and not touching any components, causing a potential short?

•Are all add-in PCI boards fully seated in their slots on the server board?

•Are all jumper settings on the server board correct?

•Are all jumper and switch settings on add-in boards and peripheral devices correct? To check these settings, refer to the manufacturer's documentation that comes with them. If applicable, ensure that there are no conflicts-for example, two add-in boards sharing the same interrupt.

•Are all peripheral devices installed correctly?

•If the system has a hard disk drive, is it properly formatted or configured?

•Are all device drivers properly installed?

•Are the configuration settings made in Setup correct?

•Is the operating system properly loaded? See the operating system documentation.

•Did you press the system power on/off switch on the front panel to turn the server on (power on light should be lit)?

•Is the system power cord properly connected to the system and plugged into a NEMA 5 15R outlet for 100-120V or a NEMA 6-15R outlet for 200-240V ?

•Are all integrated components from the tested components lists? Check the tested memory, and chassis lists, as well as the supported hardware and operating system list. See “Additional Information and Software” for links to the tested component lists.

Hardware Diagnostic Testing

This section provides a more detailed approach to identifying a hardware problem and locating its source.

Caution: Turn off devices before disconnecting cables: Before disconnecting any peripheral cables from the system, turn off the system and any external peripheral devices. Failure to do so can cause permanent damage to the system and/or the peripheral devices.

1.Turn off the system and all external peripheral devices. Disconnect each device from the system, except for the keyboard and the video monitor.

2.Make sure the system power cord is plugged into a properly grounded AC outlet.

38

Intel® Server Board S5000VSA User’s Guide

Page 55 Page 57
Page 56
Image 56
Intel S5000VSA manual Hardware Diagnostic Testing, First Steps Checklist
Page 55 Page 57

S5000VSA specifications

The Intel S5000VSA is a server motherboard that has been tailored to meet the needs of businesses requiring a reliable and scalable infrastructure. Designed for Intel's 5000 series of chipsets, this motherboard is notable for its standards in performance, flexibility, and management capabilities.

One of the standout features of the Intel S5000VSA is its support for dual Intel Xeon processors. The flexibility to utilize various Xeon chips allows organizations to select the optimal processing power for their specific workloads, whether that be database management, virtualization, or heavy computation tasks. This capability is essential for providing the high levels of performance and responsiveness businesses demand in their server environments.

The motherboard supports up to 32GB of memory using DDR2 technology, with eight DIMM slots available for expansion. This memory capacity allows for significant multitasking and resource management, essential in data-heavy server applications. The board supports both ECC (Error-Correcting Code) and non-ECC memory, offering organizations options depending on their fault tolerance needs.

In terms of connectivity, the S5000VSA comes equipped with multiple PCI Express slots, providing ample options for expandability with various I/O cards or additional network interfaces. This is particularly important as businesses grow and require additional capabilities or higher performance networking solutions.

The Intel S5000VSA is also noted for its advanced management features. Integrated Remote Management capabilities enable IT administrators to monitor and manage the system from afar, enhancing both uptime and ease of maintenance. Support for Intel’s Active Management Technology (AMT) allows for greater control over the server and improves security by enabling remote management regardless of the operating system state.

Another important aspect of the S5000VSA is its built-in RAID controller that supports several RAID levels. This feature enhances data reliability and performance, allowing users to configure their storage systems according to their needs, whether they prioritize speed or redundancy.

In summary, the Intel S5000VSA is a robust server motherboard designed with scalability, performance, and management in mind. It supports dual Xeon processors, offers extensive memory options, and provides essential features such as RAID support and remote management. This makes it a suitable choice for data centers and enterprises looking for a competitive edge through advanced technology.
Top Page Image Contents