Intellinet Network Solutions INT-524315-UM-0808-1 user manual Access Control

3-3-1 Access Control

This function allows or denies computers with a specific MAC address access to the network; it can also allow or deny computers with a specific IP address, protocol, or port.

Click the 'Firewall' menu on the left of the Web management interface, then click 'Access Control' and the following screens shows up:

1

			2	3
4	5
				6
10	7	8	9
				11
12	13		14
Items and meanings:				15
Enable MAC		Check this box to enable MAC address-based
Filtering (1):		filtering, and select 'Deny' or 'Allow' to decide the
		behavior of the MAC filtering table. If you select
		'Deny', all MAC addresses listed in the filtering
		table will be denied access to the network; if you
		select 'Allow', only MAC addresses listed in the
		filtering table will be able to connect to the network,
		and all other network devices will be rejected.
Client PC		Enter the MAC address of computer
MAC address (2):		or network device here. Dashes ( - ) or colons ( : )
		are not required. (i.e. if the MAC address label of
		your wireless device indicates 'aa-bb-cc-dd-ee-ff' or