Intellinet Network Solutions INT-524315-UM-0808-1 user manual

	SSID: The SSID of this wireless router is shown
	here.
	Authentication Mode: The wireless security
	authentication mode of this wireless router is shown
	here. If you don't enable the security function of the
	wireless router before WPS is activated, the router
	will auto-set the security to WPA (AES) and
	generate a set of passphrase keys for WPS
	connection.
	Passphrase Key: The wireless security key of the
	router is shown here.
Config Mode (3)	There are 'Registrar' and 'Enrollee' modes for the
	WPS connection. When 'Registrar' is enabled, the
	wireless clients will follow the router's wireless
	settings for a WPS connection. When 'Enrolle' mode
	is enabled, the router will follow the wireless
	settings of wireless client for a WPS connection.
Configure	Click 'Start PBC' to start a Push-Button style WPS
via Push Button (4)	setup procedure. This wireless router will wait for
	WPS requests from wireless clients for 2 minutes.
	The 'WLAN' LED on the wireless router will be on
	for 2 minutes when this wireless router is waiting
	for an incoming WPS request.
Configure	Enter the PIN code of the wireless client you
via client	wish to connect, and click the 'Start PIN' button.
PinCode (5)	The 'WLAN' LED on the wireless router will be on
	when this wireless router is waiting for an incoming
	WPS request.