Intellinet Network Solutions INT-524315-UM-0808-1 user manual UPnP Setting

3-2-5 UPnP Setting

This function enables network auto-configuration for peer-to-peer communications. With this function, network devices will be able to communicate with other UPnP enabled devices directly, and learn about other devices. Many network device and applications rely on UPnP function nowadays.

Click the 'NAT' menu on the left of the Web management interface, then click 'UPnP' and the following screen appears:

There is nothing to configure for UPnP. You can either activate it or deactivate it. Click 'Apply' to save the settings.

Click 'Continue' to go back to the previous setup menu and to continue with the router setup. Click 'Apply' to reboot the router so the settings will take effect. Please wait for about 30 seconds while the router is rebooting.