Intermec 6642 manual Removing External Floppy Disk Drive/Port Expander

Using the Pen Computer for the First Time SECTION 2

BCAUTION:	Do not place the floppy disk drive unit on its side or upside
	down.
BCAUTION:	Do not press on the floppy disk drive unit; it may damage the
	drive or cause malfunction.
BCAUTION:	Do not place the AC adapter on top of the floppy disk drive
	unit; it may cause the drive to malfunction.
	1.	Turn off the computer.
	2.	Open the cover of the external floppy disk drive/port
		expander cover on the right side of the 6642.
	3.	Connect the connector of the floppy disk drive unit to
		the 6642.

Figure 2￿5

Floppy Drive/Port Expander Connector Removal

Removing External Floppy Disk

Drive/Port Expander

1.Remove the floppy disk from the floppy disk drive.

2.Turn off the computer.

3.Disconnect the floppy disk drive unit by simultaneous9 ly pressing the buttons on each side of the connector and pulling them out. See figure 2-5.

4.Close the cover of the floppy disk drive/port expander.

2-8PEN*KEYR 6642 Pen Computer User’s Guide