Intermec 6642 manual Attaching the Expansion Battery Pack

SECTION 4 Battery Use

Attaching the Expansion Battery

Pack

Attach or replace expansion battery pack described in the procedure below. See figure 4-2.

1.Turn off the pen computer and disconnect the AC adapter.

2.Place the pen computer face down on a flat surface.

3.Slide the battery pack connector cover door open to the right (Figure 4-2, step 1).

4.Attach the expansion battery pack to the pen computer by sliding it to the right.

5.Set battery locks (Figure 4-2 step 2).

6.Drop the battery pack straight into the tabs (Figure 4-3 step 3).

7.Lock the battery in place by sliding the battery pack latches to the right and down (Figure 4-3 step 4).

"NOTE:To remove the expansion battery pack, simply reverse the installation procedure.

PEN*KEYR 6642 Pen Computer User’s Guide 4-3