Intermec 6642 manual Handling Floppy Disks, Inserting and Removing Floppy Disks

Models: 6642

1 77
Download 77 pages 48.26 Kb
Page 30
Image 30

SECTION 2

Using the Pen Computer for the First Time

Handling Floppy Disks

"NOTE:Do not open the shutter and touch the disk inside, otherwise you will not be able to read or write data to the disk.

"NOTE:Do not place floppy disks near magnetic or heat sources, or in direct sunlight or dusty environments.

"NOTE:Never subject a disk to to sudden shocks or extreme vibration. Do

not drop, bend, or place heavy objects on a disk.

"NOTE:Do not spill liquids on a disk.

Inserting and Removing Floppy

Disks

Hold the floppy disk with the arrow facing up and towards the drive. Slide the disk until it locks into place.

"NOTE:Make sure the floppy disk is inserted correctly, not upside down. Don’t use excessive force when inserting the disk into the drive. Damage may result to the drive.

Figure 2￿6

Inserting and Removing a Floppy Disk

Press the eject button firmly. The disk will pop out slightly. Remove it and store it properly.

PEN*KEYR 6642 Pen Computer User’s Guide 2-9

Page 30
Image 30
Intermec 6642 manual Handling Floppy Disks, Inserting and Removing Floppy Disks