Troubleshooting

SECTION 6

Why is the image on the external monitor display distorted?

"Check that the monitor is connected correctly.

"Make sure the CRT is not near any electric devices that have a stong magnetic fields such as a TV set, fan or radio.

"Do not share an outlet with a TV set or radio.

"Make sure the value of the Screen area in the Display Properties in Control Panel is equal to or lower than the resolution of the CRT monitor.

Problems with Hard Disk

Why can't I read or write data to or from the hard disk?

"Confirm the drive and file names are correct.

"Confirm the hard drive has enough free space.

"The hard disk in your computer is formatted with FAT32. You cannot read or write data formatted in other operating systems which are not FAT32 compat￿ ible. Applications not FAT32 compliant may not work properly.

Problems with Floppy Disk

Why can't I use a floppy disk?

"Confirm that the external floppy disk drive/port expander is correctly connected.

"Check that the floppy disk is inserted correctly.

"The floppy disk may be unformatted or corrupt.

"If you cannot write to a floppy disk, the disk may be write-protected. Eject the disk and check that the write-protect tab covers the detection hole.

"If you cannot write to a floppy disk, the disk may be full. Use another disk.

"Check that the floppy disk drive setting is set to 1.44MB in the setup utility.

6-4PEN*KEYR 6642 Pen Computer User’s Guide

Page 71
Image 71
Intermec 6642 manual Problems with Hard Disk, Problems with Floppy Disk