SECTION 6 | Troubleshooting |
Why do I get the message Operating System not found?
"Insert a boot up disk into the external floppy disk drive/port expander, then check the condition of the hard disk.
"Check the hard disk status from the setup utility. Check the size of the hard disk and make sure the Hard Disk Drive Type in the Main menu is set to Auto.
Problems with Display
Why is the screen blank?
"Press any key to see if power management has turned off the screen to save power.
"Check the power LED to see if the pen computer has power.
"If you are using the internal battery pack, make sure it has charge remaining. If you are using the expan sion battery pack, make sure it is connected correctly and has charge remaining.
"Press the power switch, wait 10 seconds and try turning the power back on.
"If you cannot restart the pen computer using the above procedure, press the reset button with the stylus pen, lo cated on the bottom of the 6642 and turn off the system. Wait 10 seconds and turn the pen computer back on.
Why is there no display on the external monitor?
"Confirm that the monitor is powered on.
"Confirm that the monitor is connected correctly.
"Check that the display setting is not set for external CRT monitor.
PEN*KEYR 6642 Pen Computer User’s Guide
