JAI TM-1020 Digital Output Cable LVDS/RS-422 version, Digital Output Cable 30DG-02

Page 11

TM-1020 Series Progressive Scan Shutter Cameras

2.2.5Digital Output Cable (LVDS/RS-422 version)

FIGURE 5. Digital Output Cable 30DG-02

Female

171

31 16

Male

20 1

25.0mm	37	19
1.00 in

78.74 in (2 meters)

The TM-1020 series camera uses the cable 30DG-02 from JAI, Inc. as a digital output cable. This cable has a 31-pin AirBorn connector on the camera end and a 37-pin D-sub male connector on the other end. Contact your JAI, Inc. representative regarding availability of interface cables for specific frame grabber models. Pin-out configuration for the digital cable is shown below.

FIGURE 6. Pin-out Configuration for Digital Output Cable

FROM 31 PIN CONN		TO 37 PIN CONN	WIRE COLOR
PIN 1		PIN 1	OR	1RED
PIN 2		PIN 2	GRY	1RED
PIN 3		PIN 3	WHT	1RED
PIN 4	GND	PIN 16 GND	YLW	1RED
PIN 5	HD		PINK	1RED
PIN 6	INTEG		OR	2RED
PIN 7	PULSE		GRY	2RED
PIN 8		PIN 8	WHT	2RED
PIN 9		PIN 9	YLW	2RED
PIN 10		PIN 10	PINK	2RED
PIN 11		PIN 11	OR	3RED
PIN 12		PIN 12	GRY	3RED
PIN 13		PIN 13	WHT	3RED
PIN 14		PIN 14	YEL	3RED
PIN 15		PIN 15	PINK	3RED
PIN 16	NC
PIN 17		PIN 20	OR	1BLU
PIN 18		PIN 21	GRY	1BLU
PIN 19		PIN 22	WHT	1BLU
PIN 20		PIN 17	YEL	1BLU

FROM 31 PIN CONN)		TO 37 PIN CONN		WIRE COLOR
PIN 21	VD			PIN	1BLU
PIN 22	EN/INTEG			OR	2BLU
PIN 23	GND	PIN 23	GND	GRY	2BLU
PIN 24		PIN 27		WHT	2BLU
PIN 25		PIN 28		YLW	2BLU
PIN 26		PIN 29		PINK	2BLU
PIN 27		PIN 30		OR	3BLU
PIN 28		PIN 31		GRY	3BLU
PIN 29		PIN 32		WHT	3BLU
PIN 30		PIN 33		YLW	3BLU
PIN 31		PIN 34		PINK	3BLU
		PIN 35	GND	SHIELD

N/C

PINS 4, 5, 6, 7 18,19, 24, 25,26, 36, AND 37

Installation