Camera Link Cable CL Versions Only | JAI TM-1020 specification

Page 12

TM-1020 Series Progressive Scan Shutter Cameras

2.2.6Camera Link Cable (CL Versions Only)

The Camera Link cable has a 26-pin connector on both ends. This is a straight-through cable and the pin-out configuration is shown in Table 4 on page 9. Contact JAI, Inc. for cable lengths other than 2 meters.

FIGURE 7. Camera Link Cable

26 Position

26 Position

High Density

High Density

Mini D Ribbon

Mini D Ribbon

(MDR) Male Plug

Cable

(MDR) Male Plug

		2x	2x

Thumbscrews			Thumbscrews

Note: For CL versions, serial communication for camera control is done via the Camera Link connector on the rear panel of the camera.

Installation

Image 22

JAI TM-1020 operation manual Camera Link Cable CL Versions Only

Contents

TM-1020 Series Progressive Scan Shutter Cameras Page CE Compliance JAI, IncPage Introduction Dynamic Range Control Problems and SolutionsSpecifications Scan Modes List of Tables List of Tables List of Figures List of Figures TM-1020 Series Progressive Scan Shutter Cameras Product Description Imager Miniature size and light weightAsynchronous reset Electronic shutter Output WarrantyIntegration TM-1020 Series System Configuration Getting Started Unpacking Instructions Accessories and OptionsCamera Setup Heat Dissipation Components List 2 a 12-Pin Connector LVDS/RS-422 version Connector Pin ConfigurationsPin Connector LVDS/RS-422 version Description 2 b 12-Pin Connector Camera Link Version Pin Connector CL Version Description Digital Output Connector LVDS/RS-422 only Analog Output Connector Shutter Speed Control Dial Shutter Speed Control Dial LVDS/RS-422 version4 RS-232 Communication Cable LVDS/RS-422 version Manual Async Digital Output Cable LVDS/RS-422 version Digital Output Cable 30DG-02 Camera Link Cable CL Versions Only Camera Link Cable Power Supplies Power Supplies and Power Cable SetupJAI, Inc. Power Cables Attaching the Analog Video Output Building Your Own Power CableAttaching the Power Cable to the Connector 12P-02S Interface Cable Pin# Lead Color Function Attaching the Camera Lens 1 Up/Down Switch Mode Selection switch Shutter Speed Control switch Mode Selection Switch Power and External Sync Connector Digital Output ConnectorAnalog Output Connector Progressive Scanning Electronic Shutter Stand-by Image Shutter Video Internal Shutter Speed Control TM-1020 Series Internal Shutter Speed Control TM-1020 Series No-Delay Shutter Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Fast Mode TM-1020-15 only Internal Shutter Speed with Slow Mode TM-1020-15 Only Internal Shutter Speed with Slow Mode TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 Only External Vinit with Pulse Width TM-1020-15 Only Programmable Look-Up Table LUT and Knee Control CCD Output Voltage Look-Up Table Two-Row Binning Full Progressive ScanExternal Sync and Pixel Locking Pixel Clock and Digital Data External Reset Timing Internal HD Async Shutter 0 Reset Timing Serial Communication Kit LVDS-Version Camera RS-232 Commands First Second Third Response Functions Character Symptom Dark Video Symptom No VideoSymptom Non-synchronized Video Information and Support Resources Weight ResolutionPower requirement Power cable TM-1020 Series Progressive Scan Shutter Cameras 1 TM-1020 Series Physical Dimensions Physical Dimensions 2 TM-1020 CL Series Physical Dimensions Spectral Response Email imaging@jai.com