JAI Operation Mode Control Switches TM-6710, Modes of Operation Shutter Operation

Page 12

Operation

3.2.1Mode Control Switches (TM-6710)

Mode	Control Switch	Up/Down Switch
0	Normal mode
1	Gain control (A/B)	up - increase gain of Ch. A
		down - decrease gain of Ch. A
2	Gain (A/B) fine tune	up - increase gain of Ch. A
		down - decrease gain of Ch. A, while decrease/increase gain of Ch. B,
		at 5:1 ration
3	Main Vref control	up - increase gain of Ch. A
		down -decrease A/D voltage reference of Ch. A & Ch. B
4	Vref balance control	up - increase gain of Ch. A
		down - increase/decrease A/D voltage reference of Ch. A, while
		decrease/increase gain of Ch. B
5	Gain selection	up: 9dB	down: 12dB
6	Gain selection	up: 18dB	down: 22dB
7	Clock selection	up: 120Hz	down: 60Hz
8	Async/Manual shutter	up: Manual	down: Async
9	Factory set recall	up/down - recall only
A	Power up (recall or save)	up: recall	down: save
B-C	User page storage (store	up: recall	down: save
	user settings)
D	Direct shutter	up - increase manual shutter speed
		down - decrease manual shutter speed
E	Partial scan	up: 100 lines	down:
F	Partial scan	up: normal scan	down: 200 lines

3.3 Modes of Operation

3.3.1Shutter Operation

The TM-6710 has a substrate drain electronic shutter mechanism which provides a superb picture at various speeds without smearing. Manual shutter speed control can be selected at 1/250, 1/500, 1/1,000, 1/2,000, 1/4,000, 1/8,000, 1/16,000 or 1/32,000 sec. rate.

Note: Some slow speed shutter rates will not apply to partial scanning.

TM-6710/6710CL High-Speed Progressive Scanning CCD Camera