JAI TM-6710 operation manual 1 c 51-Pin Connector, Camera Link Connector

Page 6

Installation

2.2.1 (c) 51-Pin Connector

The TM-6710 has a 51-pin connector for RS-644 digital output (using B channel digital output to configure single channel).

FIGURE 3. 51-Pin Connector

18 1

35 19

51			36
Pin#	Description	Pin#	Description	Pin#	Description
1	A0+	18	CLK+	35	CLK-
2	B0+	19	A0-	36	GND
3	A1+	20	B0-	37	VCC (jumper)
4	B1+	21	A1-	38	VCC (jumper)
5	A2+	22	B1-	39	EXT. HD
6	B2+	23	A2-	40	TXD
7	A3+	24	B2-	41	LPULSE
8	B3+	25	A3-	42	RXD
9	A4+	26	B3-	43	VINIT
10	B4+	27	A4-	44	INTEG
11	A5+	28	B4-	45	EXP-
12	B5+	29	A5-	46	EXP+
13	A6+	30	B5-	47	LDV-
14	B6+	31	A6-	48	LDV+
15	A7+	32	B6-	49	FDV-
16	B7+	33	A7-	50	FDV+
17	GND	34	B7-	51	GND

2.2.1 (d) Camera Link Connector

The TM-6710CL has a 26-pin connector on the rear panel to output Camera Link data. The connector pinout is shown in Figure 4 below.

FIGURE 4. Camera Link Connector

13												1
13	12	11	10	9	8	7	6	5	4	3	2	1
26	25	24	23	22	21	20	19	18	17	16	15	14

2614

TM-6710/6710CL High-Speed Progressive Scanning CCD Camera