ANTI-TIP DEVICE INSTALLATION

INSTRUCTIONS

NOTE: A risk of range tip over exists if the appliance is not installed in accordance with the installation instructions provided. The proper use of this device minimizes the risk of TIP-OVER. In using the device the consumer must still observe the safety precautions as stated in the USE and CARE MANUAL and avoid using the oven door and/or kick plate as a step stool.

Installation instructions are provided for wood and cement in either floor or wall. Any other type of construction may require special installation techniques as deemed necessary to provide adequate fastening of the ANTI-TIP bracket to the floor or wall.

Included Parts

Included with this kit are: (4) #10 x 2￿ wood screws and

(1) Anti-tip bracket.

Wood Construction

Place the bracket against the back wall, into the right rear corner where the range is to be located. Leave a gap between the wall (or side of range) and the bracket per dimension “A” (see chart). Drill (2) 1/8￿ diameter pilot holes in the center of the small holes. A nail or awl may be used if a drill is not available. Fasten the bracket securely to the floor and wall (see illustration).

Concrete Or Cement Construction

Hardware required: (2) sleeve anchors, lag bolts, and washers (not provided). Locate the bracket as described above. Drill the recommended size holes for the hardware. Install the sleeve anchors into the holes and then install the lag bolts through the bracket. The bolts must be properly tightened as recommended for the hardware. Fasten the bracket securely to the floor and wall.

Range Installation

After the anti-tip bracket has been installed, complete Steps 4-6 before sliding the range into position. Align the range to its designated location and slide it back into position. Make sure that the leveling foot is fully inserted into and secured by the anti-tip bracket. To gain access to the anti-tip bracket from the front of the range, remove the kick plate by removing the (2) screws used to secure the kick plate (Figure 5).

NOTE: Ensure that power is disconnected from the range before the kick plate is removed.

For SAFETY CONSIDERATIONS as well as optimum performance adjust the range so that it is level. This may be checked by placing a spirit level or a large pan of water on the cooktop or the oven rack. Slide-in ranges require total removal from cabinet before an adjustment can be made.

To check the range for proper installation of the anti-tip bracket: Use a flashlight and look underneath the bottom of the range to see that one of the rear leveling legs is engaged int eh bracket slot.

(2)Wood Screws into Back Wall (ALL Installations)

(2)Small Holes For

Wood Installations

Back

(2) Large Holes ForWall

Concrete Installations

 

A =

5/8￿

7/8￿

 

Model

PRG3610

PRG3010

DIMENSION A

Series

PRG4810

 

 

 

 

￿ALL RANGES CAN TIP AND CAUSE INJURIES TO PERSONS.

￿INSTALL ANTI-TIP DEVICES PACKED WITH RANGE.

￿FOLLOW ALL INSTALLATION INSTRUCTIONS.

9

Page 9
Image 9
Jenn-Air 30 ANTI-TIP Device Installation Instructions, Included Parts, Wood Construction, Concrete Or Cement Construction

30, 36 specifications

Jenn-Air has long been synonymous with luxury and innovation in the kitchen appliance industry, and their 30-inch and 36-inch built-in wall ovens exemplify that legacy. Designed to elevate the cooking experience, these ovens boast advanced technologies and features that cater to both amateur home cooks and professional chefs alike.

The standout feature of Jenn-Air wall ovens is their Precision Cooking technology, which utilizes advanced sensors and algorithms to ensure that dishes are cooked to perfection. This technology monitors the cooking process and adjusts settings automatically, taking the guesswork out of meal preparation. Whether roasting a succulent turkey or baking a delicate soufflé, users can rely on consistent and reliable results.

Both the 30-inch and 36-inch models come with a sleek, modern design that integrates seamlessly into any kitchen aesthetic. The elegant stainless steel finish not only adds a touch of sophistication but also ensures durability and easy maintenance. The intuitive touch control panel simplifies the cooking process, allowing users to effortlessly select cooking modes, set timers, and adjust temperatures with a simple touch.

One of the highlights of the Jenn-Air wall ovens is the true convection cooking feature. This ensures even heat distribution throughout the oven cavity, making it perfect for multi-rack baking or roasting. Coupled with a powerful 3,000-watt broiler, the ovens can achieve the high temperatures required for searing meat, giving it that desirable, restaurant-quality finish.

Moreover, the ovens are equipped with a self-cleaning feature that comes in handy for busy households. With the press of a button, the oven heats to an intense temperature to burn away food residues, leaving a clean interior without the need for harsh chemicals.

For those who appreciate versatility, Jenn-Air's ovens offer various cooking modes, including bake, broil, roast, and steam. The steam function is particularly innovative, as it allows for healthier cooking options, retaining nutrients and enhancing flavors without added fats.

Safety is also a priority, thanks to features such as the control lock function and automatic shut-off. These ensure peace of mind, especially in households with children.

In conclusion, the Jenn-Air 30-inch and 36-inch wall ovens embody a perfect blend of style, functionality, and cutting-edge technology. With features designed for precision cooking, ease of use, and safety, they stand out as an ideal choice for anyone looking to enhance their culinary adventures. Whether baking bread, roasting vegetables, or cooking a holiday feast, these ovens are built to inspire creativity and precision in the kitchen.