JVC AV32T20EP manual ZOOM function, EXTor, To return to a TV channel, Auto Wss, Regular, Panoramic

Remote control buttons and functions

•You can choose a video input signal from the S-VIDEO signal (Y/C signal) and regular video signal (composite signal). For details, see “y (S- VIDEO input)” on page 22.

•If you do not have a clear picture or no colour appears, change the colour system manually. See “COLOUR SYSTEM” on page 19.

•If you choose an EXT terminal with no input signal, the EXT terminal number becomes fixed on the screen.

•This TV set has a function which can automatically change over the input according to a special signal output from an external device. (The EXT-4 terminal does not support it.)

To return to a TV channel:

Press the bbutton, the 6 buttons or the Number buttons.

To use the Programme number PR 0 (AV):

When the TV and VCR are connected only by the Aerial cable, choosing the Programme number PR 0 (AV) allows you to view images from the VCR. Set the VCR RF channel to the Programme number PR 0 (AV) manually. For details, see “EDIT/ MANUAL” on page 28.

Pressing the obutton changes the choice as follows:

ZOOM function

You can change the screen size according to the picture aspect ratio. Choose the optimum one from the following ZOOM modes.

AUTO (WSS):

For any picture format except Normal Picture (4:3 Aspect Ratio), the picture will be automatically displayed in the optimum screen size.

For Normal Picture (4:3 Aspect Ratio), the picture displayed in accordance with the ZOOM mode set on the 4:3 AUTO ASPECT menu. For details, see “4:3 AUTO ASPECT” on page 20.

•AUTO may not function properly with poor signal quality. In this case, choose an optimum ZOOM mode manually.

•This TV supports WSS (wide-screen signals). When broadcasts with WSS are received with the ZOOM mode set at AUTO (WSS), the most suitable ZOOM mode is automatically chosen according to the WSS received.

REGULAR:

Use to view a normal picture (4:3 aspect ratio) as its original size is.

PANORAMIC:

(1*/,6+

TV modePR0	EXTEXT-1	modesEXT-2
Programme	EXT-4	EXTor -3
numbers
PR 1 – PR 99
	or	or

This mode stretches the left and right sides of a normal picture (4:3 Aspect Ratio) to fill the screen, without making the picture appear unnatural.

•The top and bottom of the picture are slightly cut off.

•The VCR RF channel is sent as the RF signal from the VCR.

•Also refer to your VCR instruction manual.

11