JVC AV32T20EP, AV28T20EP manual „ Auto Program, Choose AUTO PROGRAM. Then press the abutton

Using the TV’s menu

„AUTO PROGRAM

You can automatically register the TV channels which can be received well at your residence in the TV’s Programme numbers (PR) by performing the following.

1Choose AUTO PROGRAM. Then press the abutton

The COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function. There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY menu as follows:

2Press the 5 and 6 buttons to choose the country where you are now located

3Press the blue button to start the AUTO PROGRAM function

The AUTO PROGRAM menu appears and received TV channels are automatically registered in the Programme numbers (PR).

•To cancel the AUTO PROGRAM function, press the bbutton.

After the TV channels have been registered in the Programme numbers (PR), the EDIT menu appears.

•You can proceed to edit the Programme numbers (PR) using the EDIT/MANUAL function. For details, see “EDIT/MANUAL” on page 28.

•If you do not need to use the EDIT/ MANUAL function, go to the next step.

4Press the abutton to display the T-V LINK menu

5If you do not have a T-V LINK compatible VCR connected:

Press the bbutton to exit the T-V LINK menu.

If you have a T-V LINK compatible VCR connected to the EXT-2 terminal:

Follow the operating procedure “Downloading the data to VCR” on page 33 to transmit the Programme number (PR) data.

•When your TV can detect the TV channel name from the TV channel broadcast signal, it automatically registers the TV channel name (ID) to the Programme number (PR) in which the TV channel has been registered.

•If a TV channel you want to view is not set to a Programme number (PR), manually set it using the MANUAL function. For details, see “EDIT/ MANUAL” on page 28.

•The TV channel is not registered in Programme number PR 0 (AV). When you want to register a TV channel to PR 0 (AV) manually set it using the MANUAL function. For details, see “EDIT/MANUAL” on page 28.

(1*/,6+

27