JVC AV32T20EP Additional menu operations, Downloading the data to VCR, Display the INSTALL menu

Additional menu operations

Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to the VCR with the T-V LINK function.

Caution

•Only when the T-V LINK compatible VCR is connected to the EXT-2 terminal, this operation is enabled.

•Only when the T-V LINK menu is being displayed, this operation is enabled.

If “FEATURE NOT AVAILABLE” appears at the T-V LINK menu, ensure the following three items are correct; then press the abutton to retry data transmission.

•Has the T-V LINK compatible VCR been connected to the EXT-2 terminal?

•Has the VCR power been turned on?

•Does the SCART cable that is connected to the EXT-2 terminal to T- V LINK compatible VCR have all proper connections?

(1*/,6+

1Turn on the VCR

2Press the abutton

The data transmission begins.

The T-V LINK menu disappears once the data transmission ends.

When the T-V LINK menu is changed over to another menu:

The menu operation at the TV side is completed and it is shifted to the menu operation at the VCR side. Refer to the VCR Instruction Manual and operate the VCR.

Changing the COUNTRY setting

After the AUTO PROGRAM function is completed, you can change the country you have already set by using the AUTO PROGRAM function.

When registering the TV channels for French broadcast stations (SECAM-L system), perform this operation to change the country.

1Display the INSTALL menu

When the EDIT menu is currently being displayed:

Press the h(Information) to return to the INSTALL menu.

2Press the 6 buttons to choose AUTO PROGRAM. Then press the abutton

A COUNTRY menu appears as a sub- menu of the AUTO PROGRAM function. There are two COUNTRY menus. Pressing the yellow button changes the COUNTRY as follows:

33