JVC AV28T20EP EXT Setting, „ y S-VIDEO input, Preparation, To cancel the y S-VIDEO input setting

Using the TV’s menu

EXT SETTING

„y (S-VIDEO input)

When connecting a device (such as S-VHS VCR) which enables an S-VIDEO signal (Y/ C signal) to be output, you can enjoy high- quality picture of the S-VIDEO signal (Y/C signal).

Preparation:

•At first, read the Device Instruction Manual and “Additional preparation” on page 35 to connect the device to the TV properly. Second, follow the Device Instruction Manual to set the device so that an S-VIDEO signal (Y/C signal) can be output to the TV.

•Do not set y (S-VIDEO input) to the EXT terminal connected to a device which cannot output an S-VIDEO (Y/C signal). If it is set wrongly, a picture cannot appear.

1Choose an EXT terminal

2Press the yellow button and set the y (S-VIDEO input).

Then press the abutton

An y (S-VIDEO input) mark is displayed. You can view an S-VIDEO signal (Y/C signal) instead of the regular video signal (composite signal).

To cancel the y (S-VIDEO input) setting:

Press the yellow button and turn off y (S-VIDEO input) mark. The regular video signal (composite signal) pictures are resumed.

•The EXT-1 terminal does not support S-VIDEO signal (Y/C signal) and you cannot set y (S-VIDEO input) in the EXT-1 terminal.

•Setting y(S-VIDEO input) changes the head character from “E” to “S”. For example, “E2” is changed to “S2”.

•Even an device which enables the S- VIDEO signal (Y/C signal) to be output may output a regular video signal (composite signal) depending on the device setting. If a picture cannot appear because y(S-VIDEO input) setting has been made, read the device Instruction Manual carefully again to check for the device settings.

22