IBM Printing System specs

1. Printer Settings (15 ppm copier)

1-2 List of settings

Menu	Item		Available settings	Remarks
number	Item		Available settings	Remarks
number

P11	Printer Status Page print out	– – –		Print out will begin as soon as the
	Prints out a list of such items as the current printer			corresponding menu number is
	default settings and memory volume, etc.			displayed and the Enter key pressed.

P20	Parallel TX/RX mode	(1) Auto
	Sets the transmission and reception mode when the	(2)	Normal
	printer is connected to your computer with a parallel	(3)	High Speed
	interface.	(4)	Nibble (high)

P21	NetWare ON/OFF	(1)	On	Available only when the Network
		(2) Off		Card is installed.

P22	NetWare frame type	(1) Auto		Available only when the Network
	Sets the NetWare frame type.	(2)	802.3	Card is installed.
		(3)	Ethernet II
		(4)	802.2
		(5)	802.3 SNAP

P23	TCP/IP ON/OFF	(1)	On	Available only when the Network
		(2) Off		Card is installed.

P24	DHCP ON/OFF	(1)	On	Available only when the Network
		(2) Off		Card is installed.

P25	IP address	Enter the address.		Available only when the Network
				Card is installed.

P26	Subnet Mask	Enter the address.		Available only when the Network
				Card is installed.

P27	Gateway address	Enter the address.		Available only when the Network
				Card is installed.

P28	EtherTalk ON/OFF	(1)	On	Available only when the Network
		(2) Off		Card is installed.

P29	Network Card Status Page print out ON/OFF	(1)	On	Available only when the Network
	Sets whether a Status Page regarding conditions in	(2) Off		Card is installed.
	the Network Card will be printed out as well when
	the standard Status Page for the printer (menu: P11)
	or that for use by your service representative (menu:
	P76) are printed out. A more detailed Status Page is
	printed out together with the “Service Rep Status
	Page print out” setting (menu: P76).

P30	Emulation protocol (parallel interface)	(1)	Line Printer
	Sets the emulation protocol that will be used.	(2)	IBM Proprinter
		(3)	DIABLO 630
		(4) EPSON LQ-850
		(5) PCL 6
		(6)	KPDL
		(7) KPDL (AUTO)

1-3

Image 8

IBM Printing System manual List of settings Menu Available settings Remarks Number

Contents

Océ Operations Guide Instruction Handbook Introduction About this On-Line ManualPage Iii Procedure for making settings Printer Settings 15 ppm copierPrinter Settings 15 ppm copier Ppm copier Metric version Operation keysPpm copier Inch version List of settings Menu Available settings Remarks Number Menu Available settings Remarks Number Draft Mode ON/OFF Printing resolutionBypass mode Wide A4 ON/OFF Receive dump mode Printer resetResource protect mode Recovery time for Auto Continue Printer Settings 20 ppm copier Printer Settings 20 ppm copier Printer Key Message display Numeric keys Menu flow chart Menu Printer Settings 20 ppm copier Printer Settings 20 ppm copier Printer Settings 20 ppm copier Emulation protocol Interface selectionNetwork Card Status Page print out on Item No Display message Available settings Remarks Line Feed LF handling Carriage Return CR handlingReading data Reading program data Deleting data Deleting font dataDeleting program data Deleting macro data Form feed time-out Duplex modeFormatting the Memory Card Receive dump mode Memory Card / RAM Disk Memory Card / RAM DiskMemory Card RAM Disk Printer control commands Using printer control commands Procedure Writing print data \WINDOWSECHO !R! Rwer S,A,0,ÓFONT1Ó,ÓFONTÓ,45040LPT1 12 3 4 Writing font data Reading print data Deleting print data or font data Printing out the Partition List Auto Partition List print out ON/OFF Procedure for Installing and Printing with a Printer Driver Included printer driversDriver type Description Compatible OS Collator driver Installing the Printer Drivers System Conditions Screen that Appears when the CD-ROM is Inserted Installing the Printer Driver Windows Installing the Printer Drivers Click Yes if so, or click No if not Uninstalling the Printer Driver Making the printer driver settings in Windows Printing Printing from the application Windows XL Driver Making printing and property settingsWindows XL Driver Media Tab Setting a custom paper size Custom Media Size dialog box Layout Tab Imaging Tab Output Tab Device Settings Tab User Settings Administrator Settings Opening the Properties Window Printer Driver for Windows 95/98Printer Driver for Windows 95/98 Media choiceDraft Mode Paper Tab Universal DriverPaper source Unprintable Area Paper -- More Options Universal Driver Printing on both sides duplex printingDoes not print on both sides Prints on both sides and binds along the longer edge Resolution Graphics modeGraphics Tab Universal Driver Dithering Printer memory Device Option Tab Universal DriverPrint qualityManagement Code Prints widthwise Paper Tab KPDL2 DriverPrints lengthwise More Paper Options KPDL2 Driver Special Graphics Tab KPDL2 DriverHalftoning Print features Draft ModeDevice Options Tab KPDL2 Driver Available printer memory in KB Installable options Management CodeEdge Smoothing Policy PostScript Tab KPDL2 Driver Printer Driver for WindowsNT Printer Driver for WindowsNT Paper/Output Universal Driver Copy Count Graphic Universal Driver Print on Both Side Duplex Printing Document Options Universal Driver MediaPaper/Output Print Quality Management Code Device Settings Tab Universal Driver Installed Memory Kilobyte Paper/Output KPDL2 Driver Graphic KPDL2 Driver Document Options KPDL2 Driver PostScript Options Printer Features PagePolicy Does not sort Device Settings Tab KPDL2 Driver Installable Options Opening the Printing Preference Window Printer Driver for Windows2000Printer Driver for Windows2000 Order Print from 1stPer Sheet N-up Advanced Universal Driver Paper Source KPDL2 Driver Paper Source Graphics Print Quality Advanced OptionsPaper/Output Paper Size Document Options Advanced Printing Features Printer Features Draft Mode PagePolicy only available with KPDL2 Driver Selection PostScript Options Device Settings Tab Optional Disk only available with KPDL2 Driver Installing the PPD files Printer Driver for MacintoshPrinter Driver for Macintosh Required computer environment Window shown on the right will appear. Click on Continue Chooser will appear Pages General Dialog BoxPrinter Layout Dialog Box Layout DirectionBorder Print on Both sides You are going to select Auto Select under Paper source Printer Specific OptionsSmoothing Rotate SortOff Does not sort Setup dialog Dialog Box Format forPaper Scale Image & Text PostScript Dialog BoxVisual Effects Custom paper sizes Dialog Box New buttonEdit button Delete button