IBM Printing System manual Printer Settings 15 ppm copier, Procedure for making settings

1. Printer Settings (15 ppm copier)

1. Printer Settings (15 ppm copier)

IMPORTANT!

All setting items and the selection of their actual settings are accomplished in this machine based on a maximum 3-digit entry system. Refer to “1-2 List of settings” on page 1-3for information regarding the various items as well as their corresponding menu numbers and available settings.

1-1 Procedure for making settings

1	Press the Printer key. The machine will switch to the printer mode and “P00” will
	appear in the copy quality/magnification display.

2	Use the numeric keys to enter the desired menu number and then press the Enter
	key.
	Use the “▲” and “▼” keys to scroll through the menu numbers one number at a time.
	(Any menu number that does not have a corresponding setting item will be skipped
	and the next viable menu number that DOES have an available setting will be
	displayed.)
3	NoteSelect the desired setting.
	Settings are normally changed by using the “▲” and “▼” keys to select a value (or the

4

number that corresponds to the desired setting) and then pressing the Enter key. When it is necessary to type in a value or number directly (such as with a network address or the time, etc.), use the numeric keys to enter the desired information and then press the Enter key. (When you enter a network address it necessary to press the Enter key after each block of 3 digits.)

Press the Printer key again to switch back to the copier mode.

1-1