IBM Printing System manual Printer Driver for Windows 95/98, Graphics Tab KPDL2 Driver, Resolution

3. Printer Driver for Windows 95/98

3-6 Graphics Tab (KPDL2 Driver)

■Resolution:

Specify the desired print resolution. The resolution must be specified in the number of dots per inch (dpi). Select between “600 x 600 dots per inch (dpi)” and “300 x 300 dots per inch (dpi)”. The factory default setting is “600 dots per inch (dpi)”.

■Halftoning:

Specifies values for the number of line per inch “frequency” and angle of the pattern that you want to use for halftone screens. If you are getting a more pattern when you print graphics such as photographics or detailed images, you may want to adjust these settings. However, the default printer settings should work in most cases.

*Do not change these settings unless you have experience using halftones. To return to the default settings after you have made changes, click Use printer’s settings.

■Special:

[Print as a negative image]	Prints a negative of the image by complementing the RGB values or reversing the black and white
	values. Click this option to see an example.
[Print as a mirror image]	Prints a mirror image of the your document by reversing the horizontal coordinates. Click this
	option to see an example.

■Scaling:

Specifies the size of the image to print. You can specify from 25% to 400% prints an image four times larger than the original.

3-8