IBM Printing System manual Windows XL Driver, Layout Tab, Pages per Sheet, Print Borders, Scaling

2. Windows XL Driver

2-3 Layout Tab

■Pages per Sheet:

Allows you to print reduced images of multiple (1, 2, 4, 6, 9, 16 or 25) pages onto a single sheet of paper. This function is called “N-Up” printing (where “N” equals the number of image pages). Reduction of the images is calculated automatically so that all of the selected pages fit onto the single sheet of paper. The factory default setting is “1” (one page to each sheet of paper).

Example: With 2-Up printing

Prints reduced images of 2 full pages onto a single sheet of paper.

■Print Borders

Prints border lines between the different images when the “Pages per Sheet” function is selected.

■Layout

Specifies the order of display of the images when the “Pages per Sheet” function is selected.

■Scaling

Allows enlargement or reduction of the image size.

Note

The image size will normally be enlarged or reduced according to the difference in the setting made in the “Page Size” and “Print Size” fields. If you then change the setting here, the actual magnification will be based on the original settings and the image may be even further enlarged or reduced.

■Print on Both Sides [Duplex]

Select this checkbox by clicking on it and putting a check mark in the box in order to perform Duplex (2-sided) printing.You can then select the desired image direction for each side of the paper.

[Flip on Short Edge]	Select this option when making duplex prints in order to have the image on the two sides of the paper
	printed in the opposite direction from each other, as though the paper was turned over along its
	shorter edge.
[Flip on Long Edge]	Select this option when making duplex prints in order to have the image on the two sides of the paper
	printed in the same direction as each other, as though the paper was turned over along its longer
	edge.

*20 ppm copier: Available only when the optional Duplex Unit is installed.

*15 ppm copier: Duplex printing is NOT available.

*Paper sizes, types and source of paper feed that are acceptable for duplex printing are as follows:

Paper sizes: Letter (8 1/2" x 11"), Legal (8 1/2" x 14"), Ledger (11" x 17"), Statement (5 1/2" x 8 1/2"), A3, A4, A5, Folio (210 mm x 330 mm), JIS B4 and JIS B5

Paper types: Plain, Recycled and Color

Source of paper feed: Any tray EXCEPT the Bypass Tray

2-4