5. Printer Driver for Windows2000

5. Printer Driver for Windows2000

The following procedure explains the functions of the Universal driver and the KPDL2 driver for those who use Windows 2000 as their operating system.

*This Instruction Handbook uses illustrations from the message display of the 20 ppm copier for purposes of explanation, but the actual basic operation procedure is the same for 15 ppm copiers as well.

*Depending upon version upgrades of the printer driver, the screenshots shown here may differ somewhat from that of the actual printer driver.

*Depending upon the model of your copier, there may be functions that are not supported or that require optional equipment to be installed. Even if the settings for such functions are performed, they will not be effective.

*Refer to the Instruction Manual for Windows or to On-Line Help for information regarding items that are not explained in this Instruction Handbook.

*If you use the KPDL 2 driver, be sure to set the emulation mode in the printer to “KPDL” or “KPDL(AUTO)”.

5-1 Opening the Printing Preference Window

1

Start Windows2000.

2

Click on [Start] on the task bar.

 

The Start menu will appear.

 

Use the mouse to point to [Settings].

 

3

A submenu will appear, so click on [Printers].

 

The [Printers] folder will open.

 

Use the right mouse button to click on the icon for this printer. A pop-up menu will be

4

displayed.

Select [Printing Preferences] from the menu.

The Printing Preferences window will open.

* When you are making settings for optional equipment, select [Properties] here and then click on the [Device Settings] Tab.

5-1

Page 69
Image 69
IBM Printing System manual Printer Driver for Windows2000, Opening the Printing Preference Window