JVC AV28T20EP Setting up your TV, Connecting the aerial and VCR, B → C, „ Rear Panel, Aerial

Setting up your TV

Caution

• Turn off all the equipment including the TV before connecting anything.

Connecting the aerial and VCR

•The connecting cables are not provided.

•For further details, refer to the manuals provided with the devices to be connected.

„ If connecting a VCR, follow A →		Aerial
B → C.
„ If not connecting a VCR, follow 1.		75-ohm
		Coaxial
To operate T-V LINK functions, a T-V	Back of the TV Cable
LINK compatible VCR must be connected to
the EXT-2 terminal on the TV. For details
about T-V LINK functions, see “T-V LINK
FUNCTIONS” on page 5.	S	S
	EXT-2	EXT-3
• A video can be viewed from the VCR	R
without performing C. For details, refer	L
	EXT-1
	AUDIO OUT
to your VCR instruction manual.		75-ohm
• To connect additional external devices,	21-pin
please see “Additional preparation” on	SCART	Coaxial
		Cable
page 35.	Cable

• To connect speakers and amplifier, please	VCR	To Aerial
see “Connecting Speakers/Amplifier” on		Input
page 36.
• When a decoder is connected to a T-V
LINK compatible VCR, set the
DECODER (EXT-2) function to ON. For		To Aerial
details, see “Using the DECODER (EXT-
2) function” on page 34. Otherwise, you	AV IN/OUT	Output
will not be able to view scrambled	Terminal
channels.

„Rear Panel

	1 Aerial socket (2)
	2 EXT-1 terminal (2, 22, 35)
	3 EXT-2 terminal (2, 5, 22, 35)
	4 EXT-3 terminal (22, 35)
EXT-2	5 AUDIO OUT terminal (36)
	EXT-3
S	S

L
R	EXT-1
AUDIO OUT

2