JVC CA-D672TR manual To Play a Disc, Resume, To Change Discs While Playing

English

DISC	DISC
DISC	or DISC
DISC	DISC

To Play a Disc ——————————————————————————

This function plays the disc in the Unit continuously.

1. Prepare the discs.

2. Press the DISC button (1-3) of the disc you want to play.

The first track of the selected disc will begin playing.

When the selected disc finishes playing, the next disc will begin playing automatically. When the last disc has finished playing, the Unit will stop automatically.

❏When a DISC button is pressed while a tray is open, the open tray will close automatically and Continuous Play playback begins from the first track of the disc.

To use Continuous Play from the first track of the disc selected by the disc marker, you do not need to press a DISC button (1-3), just press the Ü/8or CD button (or £ button on the Remote Control).

Playing order of discs

❏When playback starts from DISC-1, the playing order is DISC-1 = DISC-2 = DISC-3. When DISC-3 has finished, the CD Player selects DISC-1 (the disc marker is on) and stops.

❏When playback starts from DISC-2, the playing order is DISC-2 = DISC-3 = DISC-1. When DISC-1 has finished, the CD Player selects DISC-2 (the disc marker is on) and stops.

❏When playback starts from DISC-3, the playing order is DISC-3 = DISC-1 = DISC-2. When DISC-2 has finished, the CD Player selects DISC-3 (the disc marker is on) and stops.

•If any of the disc trays are empty, the CD Player skips that disc tray and continues through the remaining disc trays in the order shown above.

Note: If there is no CD in disc tray for the DISC button you pressed, the message “OPEN” appears in the display and the disc tray automatically opens. If there is no disc in the disc tray for the selected disc number, when the Ü/8or CD button (or the £button on the Remote Control) is pressed, playback begins from the next disc.

To stop play the disc, press the 7button.

To stop play and remove the disc, press the 0button for the disc being played.

To pause, press the Ü/8 button. The Disc display will blink. (The Pause function cannot be used with the £ button on the Remote Control.)

To cancel pause, press the Ü/8 button again (or press the £button on the Remote Control). Play continues from the point where it was paused.

RESUME ————————————————————————————

When the 7button is pressed during playback, and the source is changed, the track number is memorized even when the power is turned off. The next time the Ü/8or CD button (or the £ button on the Remote Control) is pressed, play resumes from the track where it was interrupted.

❏To start playback from the first track, press the DISC button.

To Change Discs While Playing ———————————————————

You can replace a CD in a tray not being used, while another CD is playing.

1. Press the 0button of the tray not being used.

The tray opens.

2. Replace the disc in the tray.

3. Press the 0button to close the tray.

20