JVC CA-D672TR manual Connecting a VCR, English, Right speaker, Audio Out, Audio In

CAUTION: Make all connections before plugging the Unit into an AC power outlet.

Connecting the Speakers (Please refer to instructions for speakers as will when you connect speakers.)

For each speaker, connect one end of the speaker wire to the speaker terminals on the back of the CA-D672TR and the other end to the speaker.

1.Open each of the terminals and insert the speaker wires firmly (be sure to remove the insulation at the end of each wire first), then close the terminals.

2.Connect the red (+) and black (–) terminals of the right side speaker to the red (+) and black (–) terminals marked RIGHT on the CA-D672TR.

Connect the red (+) and black (–) terminals of the left side speaker to the red (+) and black (–) terminals marked LEFT on the CA-D672TR.

English

SPEAKERS
RIGHT	LEFT
+	+
–	–

Right speaker Left speaker

1 2 3

IMPORTANT: Use speakers with the correct impedance only. The correct impedance is indicated on the back panel.

CAUTION: If a TV is installed near speakers, the TV may display irregular colours. In this case, set the speakers away from the TV.

Connecting a VCR

Connect the VCR to the VCR terminal.

VCR

RIGHT LEFT

AUDIO OUT

IN

(PLAY)

OUT

(REC)

AUDIO IN

Now you can plug the AC power cord into the wall outlet, and your CA-D672TR is at your command!

5