Continued
When using the remote control, make sure that it is ready for CD operations.
•Pressing CD 1, CD 2, CD 3, or CD 6 on the remote control makes the remote control ready for CD operations.
Loading CDs
1 Press one of the open/close buttons (0) for the disc tray (CD 1 to CD 3) you want to load a CD onto.
The unit automatically turns on and the selected disc tray comes out. The corresponding CD number lamp (CD 1 to CD 3) lights.
2 Place a disc correctly on the circle of the disc tray, with its label side up.
Good |
|
|
No good | ||
•When using a CD single (8 cm), place it on the inner circle of the disc tray.
3 Press the same open/close button (0) you have pressed in step 1.
The disc tray closes.
4 Repeat steps 1 to 3 to place other CDs.
When loading more than one CD continuously
Press the open/close button (0) for the next tray you want to place a CD onto. The first disc tray automatically closes and the next disc tray comes out.
About the CD number lamps (CD 1 to CD 3 buttons)
Each disc number lamp corresponds to the disc tray of the same number.
•It lights green when you press 0and when the unit has recognized that there is a CD on the corresponding disc tray.
•It goes off when the unit has recognized that there is no CD on the corresponding disc tray.
•It flashes while a CD on the corresponding disc tray is played back or paused.
Playing Back the Entire Discs — Continuous Play
You can play CDs continuously.
1 Load CDs.
2 Press one of the CD number buttons (CD 1, CD 2 and CD 3) for the disc you want to play.
CD playback starts from the first track of the selected disc.
This shows the currently selected disc.
Track No. Elapsed playing time
•Pressing #/ 8 for the CD player (or CD 6on the remote control) instead of the CD number buttons starts playing back the currently selected CD.
To stop during play, press 7for the CD player.
To remove the disc, press the corresponding open/close buttons (0).
CD playback sequence
When 3 CDs are loaded on the disc trays, they are played in one of the following sequences.
•When CD 1 is pressed : CD 1 ]CD 2 ] CD 3 (then stops)
•When CD 2 is pressed : CD 2 ]CD 3 ] CD 1 (then stops)
•When CD 3 is pressed : CD 3 ]CD 1 ] CD 2 (then stops) * If no CD is on the disc trays, CD player skips that tray.
Basic CD Operations
While playing a CD, you can do the following operations.
To exchange CDs during playback of another
Press the open/close button (0) corresponding to a CD number not currently being played to eject that disc tray and exchange the CD.
If CDs are exchanged during playback, playback will stop after playing all newly inserted CDs.
To stop playback for a moment
Press #/ 8for the CD player (or CD 6on the remote control).
To resume play, press #/ 8 for the CD player (or CD 6 on the remote control) again.
– 20 –
