How the EON function actually works:
CASE 1
If there is no station broadcasting the program you have selected
The unit continues tuning in the current station.
˙
When a station starts broadcasting the program you have selected, the unit automatically switches to the station. The indicator of received PTY code starts flashing.
˙
When the program is over, “EON END” appears in the main display, and the unit goes back to the previously tuned station, but the EON function still remains activated.
CASE 2
If there is a station broadcasting the program you have selected
The unit tunes in the program. The indicator of received PTY code starts flashing.
˙
When the program is over, “EON END” appears in the main display, and the unit goes back to the previously tuned station, but the EON function still remains activated.
CASE 3
If the FM station you are listening to is broadcasting the program you have selected
The unit continues to receive the station but the indicator of received PTY code starts flashing.
˙
When the program is over, the indicator of received PTY code stops flashing and remains lit, but the EON function still remains activated.
Alarm function
If an ALARM (Emergency) signal is received from a station while listening to the radio, the unit automatically switches to the station broadcasting the ALARM signal, except when you are listening to
Test function
The TEST signal is used for testing the ALARM signal. Therefore, it makes the unit work in the same way as the ALARM signal does.
If a TEST signal is received from a station while listening to the radio, the unit automatically switches to the station broadcasting the TEST signal, except when you are listening to
More about the EON function
•EON data sent from some stations may not be compatible with this unit.
•While listening to a program tuned in by the EON function, the station does not change even if another network station starts broadcasting a program of the same EON data.
•While listening to a program tuned in by the EON function, you can only use the EON and DISPLAY buttons as the tuner operation buttons.
•If the stations alternate intermittently between the station tuned by the EON function and the currently tuned station (“WAITING” flashes in the main display), press EON to cancel the EON function.
If you do not press the button, the currently tuned station is received finally (“NOT FOUND” appears this time), and the indication of the EON data type flashing on the display disappears.
– 17 –
