Continued
There are three timers available — Recording Timer, Daily Timer, and Sleep Timer.
Before using these timers, you need to set the clock built in the unit. (See page 11.)
Using Recording Timer
With Recording Timer, you can make an MD of a radio broadcast automatically. You can set three Recording Timer separately.
•You can set Recording Timer whether the unit is turned on or off.
•To correct a
If the CANCEL button does not work, press CLOCK/ TIMER repeatedly and start from step 1 again.
How Recording Timer actually works
The unit automatically turns on, tunes into the specified station, turns off the volume, and starts recording on the MD when the
1 Press CLOCK/TIMER repeatedly to select Timer Recording 1, 2 or 3 setting mode.
•Each time you press the button, the timer mode changes as follows:
|
|
|
|
DAILY on/off | Turns on/off Daily Timer. | ||
DAILY |
| setting mode | Sets Daily Timer. |
| |||
REC1 |
| on/off | Turns on/off Recording |
| |||
|
|
| Timer 1. |
REC1 |
| setting mode | Sets Recording Timer 1. |
REC2 |
| on/off | Turns on/off Recording |
| |||
|
|
| Timer 2. |
REC2 |
| setting mode | Sets Recording Timer 2. |
REC3 |
| on/off | Turns on/off Recording |
| |||
|
|
| Timer 3. |
REC3 setting mode | Sets Recording Timer 3. | ||
|
|
|
|
Clock setting mode | Sets the clock (see page | ||
|
|
| 11). |
Timer/Clock setting |
| ||
mode is canceled |
| ||
|
|
|
|
2 Rotate the right jog dial to set the hour of the timer- on time, then press SET.
3 Rotate the right jog dial to set the minute of the
4 Rotate the right jog dial to set the hour of the timer- off time, then press SET.
5 Rotate the right jog dial to set the minute of the
6 Rotate the right jog dial to select a preset station channel number, then press SET.
7 Rotate the right jog dial to select a recordable MD in deck B, then press SET.
The corresponding REC (1, 2, 3) indicator stops flashing and remains lit. The settings you have done are shown in the main display in sequence.
•You can select “MD 1,” “MD 2,” “MD 3,” and “MD ALL.” When you select “MD ALL,” recording will be done on all loaded MDs continuously.
8 Press 
to turn off the unit (on standby) if necessary.
To stop recording any time, press 7on MD deck B.
After a timer recording is complete...
Set the volume to an appropriate listening level.
•While recording volume is turned off, and will not be restored automatically.
To turn on or off Recording Timer after its setting is done
1Press CLOCK/TIMER repeatedly until “REC1,” “REC2,” or “REC3,” which you want appears in the main display.
2To turn off the Recording Timer, press CANCEL. The corresponding REC (1, 2, 3) indicator goes off from the display.
The Recording Timer is canceled, but the setting for the Recording Timer remains in memory.
To turn on the Recording Timer, press SET.
The corresponding REC (1, 2, 3) indicator lights up on the display. The settings you have done are shown in the main display in sequence for your confirmation.
– 50 –
