Page 63 Monday, 12 July 2004 14:25
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
Example: Dubbing to an MD
1Connect the unit and a digital audio device using either an
optional optical cable or an optional coaxial cable.
2Place a disc on the unit and load an MD on the connected digital
3Select the audio to be dubbed.
4Start playback slightly before the actual point from where you
wish to start dubbing.
5Press 9 to pause playback.
6Select the input mode on the connected digital audio device.
7Press 4 to start playback on the unit.
8Start recording on the digital audio device.
9Stop recording on the digital audio device. Then press 8 to stop
playback on the unit.
There may be a discrepancy of several seconds between where you
intend editing to start, and where it actually starts.Digital Audio Dubbing
●Turn on the TV and select the AV mode.
●Slide the TV/CABLE/DBS/DVD switch to DVD.
AV COMPU LINK
ANTENNA OUTPUT INPUT
Rear of unit
Note for connection:
Remove the protection cap from the optical cable.
Digital audio device
(MD deck, etc.)
DIGITAL OUT (COAXIAL)
DIGITAL OUT (OPTICAL)
DR-MH30UJ_00.book Page 63 Monday, July 12, 2004 3:17 PM