Still Picture/Frame-By-Frame Playback, Slow Motion

Filename [DR-MH30UJ_05DVD Operation.fm]
DR-MH30UJ_00.book Page 29 Monday, July 12, 2004 3:17 PM	Masterpage:Right+
DR-MH30UJ_00.book Page 29 Monday, July 12, 2004 3:17 PM
	BASIC OPERATIONS ON DVD DECK EN 29

Still Picture/Frame-By-Frame Playback

NOTES:

● “DISC RESUME” setting works on DVD VIDEO, VCD, SVCD and

already finalized DVD-R/DVD-RW (video mode) discs. For other

types of discs, the function under “ON” setting will be applied even if

“RESUME” is set to “DISC RESUME”. ( pg. 68)

1 Press 9 to pause during playback.

● If you stop the playback of a disc for which a resume point has

2 Press SLOW – (3) or SLOW + (5) to activate frame-by-

already been memorized, the memory will be updated with the new

resume point.

frame playback.

● After the unit has memorized the resume points for 30 discs,

● Each press of SLOW – (3) or SLOW + (5) advances/reverses

remembering a new resume point will cause the unit to delete the

the still picture frame by frame.

oldest memorized point. Stopping playback of a disc for which a

● Frame-by-frame playback for reverse direction cannot be performed

resume point is already stored may change the order in which the

with Video CD/SVCD discs.

points are stored. This may potentially change the order in which

● To resume normal playback, press 4.

points are deleted.

Slow Motion

● When the unit memorizes a resume point for a disc, it also

remembers audio language, subtitle and angle settings.

● This function may not work for some Video CD/SVCDs.

● When “RESUME” is changed to “ON” or “OFF” ( pg. 68), resume

points of the discs memorized with “RESUME” set to “DISC

RESUME” will be cleared.

1 Press 9 to pause during playback.

● Resume points are memorized for each side of a double-sided disc.

2 Press SLOW – (3) or SLOW + (5) for 2 or more seconds.

● When you switch to HDD during playing back CD, playback stops.

The Resume Function doesn’t work, when you switch to DVD after

● Each press of SLOW – (3) or SLOW + (5) increases the slow

that to playback the disc.

motion speed for each direction (from 1/16 to 1/2 times the normal

Marking Positions To Play Back Again Later

speed).

● Slow motion for reverse direction cannot be performed with Video

CD/SVCD discs.

Skip Search

During playback, press .

●Each press initiates an approximately 30-second period of fast- motion playback. Normal playback resumes automatically.

Resume Function

It is possible to memorize the position where you stop playback and resume playback from that position.

●Be sure to set “RESUME” to “ON” or “DISC RESUME”. ( pg. 68)

1 Press 8 during playback to memorize a resume point.

●The unit enters Resume Stop mode and memorizes the position where you have stopped playback as a resume point. (The inside of the disc status indicator on the front display panel blinks while memorising.)

●The unit retains a memory of the resume points of the last 30 discs played back, even though they have been ejected if “RESUME” is set to “DISC RESUME”. ( pg. 68)

●To clear the resume points:

(The inside of the disc status indicator stops blinking and lights.)

When “RESUME” is set to “ON”:

•Press 1 to turn off the unit.

•Press x to take out the disc.

•Press 8 in stop mode.

•Press TOP MENU to display the top menu, then start playback by selecting an item, etc.

•Press MENU to display the disc menu, then start playback by selecting an item, etc.

It is possible to mark positions (up to 999 points) where you want to play back once again later, and start playback from a marked position. Marking onto DVD-RAM/RW/R discs when recording is helpful to locate a start point when you play back the discs later.

To mark positions:

During playback, press MARK at positions you want to mark.

●“MARK” appears on the TV screen. You can easily locate the marked positions using 2 or 6 when you play back the disc.

To delete the marked positions: While paused, press 2 or 6 to locate a marked position you want to delete, then press MARK.

●Crossed “MARK” appears on the TV screen, and the marked position is deleted.

NOTES:

●When a monaural program changes to a stereo program while recording, a mark signal is automatically recorded.

●When a DVD-R/RW (Video mode) disc is finalized, marked points marked before finalizing will be deleted, and programs will be divided automatically into “chapters” approximately every 5 minutes.

( pg. 72)

When “RESUME” is set to “DISC RESUME”:

•Set “RESUME” to “OFF”. ( pg. 68)