Sony XAV-E722 Specifications, Accessories. Please ask the dealer for detailed, Information

Car audio and car goods internet store Winauto

Specifications	Power requirements: 12 V DC car battery
		(negative ground (earth))
	Dimensions: Approx. 178 ⋅ 100 ⋅ 189 mm
		(7 1/8 ⋅ 4 ⋅ 7 1/2 in) (w/h/d)
Monitor section	Mounting dimensions: Approx. 182 ⋅ 111 ⋅ 164 mm
Display type: Wide LCD color monitor		(7 1/4 ⋅ 4 3/8 ⋅ 6 1/2 in) (w/h/d)
Dimensions: 7.0 in	Mass: Approx. 2.5 kg (5 lb 9 oz)
System: TFT active matrix
	Supplied accessories:
Number of pixels:
		Remote Commander: RM-X170
1,152,000 pixels (800 × 3 (RGB) × 480)
		Parts for installation and connections (1 set)
Color system:
		CD-ROM (Application disc)
PAL/NTSC/SECAM/PAL-M automatic select
	Optional accessories/equipment:
Tuner section		Mobile monitor: XVM-B62
		USB and Video connection cable for iPod:
FM		RC-202IPV, RC-200IPV
		Rear View Camera: XA-R800C
Tuning range: 87.5 – 108.0 MHz
Antenna (aerial) terminal:	Your dealer may not handle some of the above listed
External antenna (aerial) connector
	accessories. Please ask the dealer for detailed
Intermediate frequency: 150 kHz
	information.
Usable sensitivity: 10 dBf
Selectivity: 75 dB at 400 kHz
Signal-to-noise ratio: 70 dB (mono)	US and foreign p tents licensed from Dolby
Separation: 40 dB at 1 kHz	Labor tories.
Frequency response: 20 – 15,000 Hz
AM	MPEG Layer-3 audio coding technology and
Tuning range: 531 – 1,602 kHz
	patents licensed from Fraunhofer IIS and Thomson.
Maximum power output:winauto52 W ⋅ 4 (at 4 ohms)		the supplied CD-ROM
Antenna (aerial) terminal:
External antenna (aerial) connector	Design and specifications are subject to change
Intermediate frequency: 25 kHz	with ut notice.
Sensitivity: 26 µV
DVD/CD Player section	Regi n code
Signal-to-noise ratio: 120 dB	The region system is used to protect software
Frequency response: 10 – 20,000 Hz	copyrights.
Wow and flutter: Below measur ble limit	The region code is located on the bottom of the unit,
Harmonic distortion: 0.01%	and only DVDs labeled with an identical region code
Region code: Labeled on the bottom of the unit	can be played on this unit.
	DVDs labeled ALL can also be played.
USB Player sect on	If you try to play any other DVD, the message
Interface: USB (Full-speed)
	“Playback prohibited by region code.” will appear on
Maximum current: 500 mA	the monitor screen. Depending on the DVD, no region
Power amplifier section	code may be labeled even though playing the DVD is
	prohibited by area restrictions.
Outputs: Speaker outputs	System requirements for the software
Speaker impedance: 4 – 8 ohms

General

Outputs:

Video output terminal (rear) Audio output terminals (front/rear) Subwoofer output terminal

Power antenna (aerial) relay control terminal Power amplifier control terminal

Inputs:

Telephone ATT control terminal

Illumination control terminal

Remote controller input terminal

Antenna (aerial) input terminal

Parking break control terminal

Reverse input terminal

Camera input terminal

AUX audio input terminals

AUX video input terminals

USB signal input connector

External input terminal

Computer

•CPU/RAM

–IBM PC/AT compatible machine

–CPU: Intel Pentium III Processor 450 MHz or higher

–RAM: 256 MB or more (For Windows XP), 512 MB or more (For Windows Vista or later)

•CD-ROM drive

•USB port

continue to next page T

51