Sony XAV-E722 user manual Error displays/messages, Time the problem began

	Car audio and car goods internet store Winauto
Error displays/messages		SensMe™ data Reading...
		The unit is reading all data for the SensMe™ function
		in the connected USB device.
Cannot read.
		T Wait until reading is complete. Depending on the
• The unit cannot read the data due to some problem.			amount of data, etc., it may take time.
• The data is damaged or corrupted.		The connected USB device is not supported.
• The disc is corrupted.
		For details on the compatibility of your USB device,
• The disc is incompatible with this unit.
		visit the support site.
• The disc is not finalized.
		The SensMe™ data is corrupted.
Disc Error
		The data for the SensMe™ function has a problem,
• The disc is dirty or inserted upside down.
		such as altered file name, information, etc.
T Clean or insert the disc correctly.
		USB device is not connected.
• A blank disc has been inserted.
		USB is selected as source without a USB device
• The disc cannot play due to a problem.
		connected. A USB device or a USB cable has been
T Insert another disc.
• The disc is not compatible with this unit.		disconnected during playback.
		T Be sure to connect a USB device and USB cable.
T Insert a compatible disc.
• Press Z to remove the disc.		USB Reading...
Disc Reading...		The unit is reading all file/album (folder) information
		in the connected USB device.
The unit is reading all file/album (folder) information
		T W it until re ding is complete and playback starts
on the disc.
			autom tic lly. Depending on the structure, it may
T Wait until reading is complete and playback starts
automatically. Depending on the disc structure, it			take time.
may take more than a minute.		“		” or “	”
		D	ring reverse or fast-forward, you have reached the
Error
	winauto
The USB device was not automatically recognized.		beginning or the end of the disc and you cannot go any
		further
T Reconnect it again.
		“	”
Hubs not supported.
		The character cannot be displayed with the unit.
USB hubs are not supported on this unit.
Local Seek +/Local Seek –		If these solutions do not help improve the situation,
The local seek mode is on during automatic t ning.
		consult your nearest Sony dealer.
No playable data.
		If you take the unit to be repaired because of disc
The disc does not contain playable d ta.		playback trouble, bring the disc that was used at the
No SensMe™ data on device.		time the problem began.

The connected USB dev ce does ot co tain data for the SensMe™ function, or the data has been moved an improper location on the USB device.

Offset

There may be an internal malfunction.

T Check the connection. If the error indication remains on the display, consult your nearest Sony dealer.

Output connection failure.

The connection of speakers/amplifiers is incorrect. T See the supplied “Installation/Connections” guide

to check the connection.

Overcurrent Caution on USB The USB device is overloaded.

T Disconnect the USB device, then change the source by pressing (SOURCE/OFF).

T Indicates that the USB device is out of order, or an unsupported device is connected.

Playback prohibited by region code.

The DVD’s region code differs from the unit’s region code.

Please push reset.

This unit or USB device cannot be operated due to a problem.

T Press the reset button (page 14).

55