Rear view camera settings
You can display setting items on the picture from the rear view camera to assist operation.
This setting is available only when:
–“Camera Input” is set to “ON” (page 39).
–the parking brake is applied.
Additional Information
Precautions
•Cool off the unit beforehand if your car has been parked in direct sunlight.
•Power antenna (aerial) extends automatically.
1Touch “Source List,” then 
.
The general setting menu appears. If not, touch “General.”
2Touch V/V to scroll, then touch “Rear View Camera Setting.”
The setting items appear.
Moisture condensation
Should moisture condensation occur inside the unit, remove the disc and wait for about an hour for it to dry out; otherwise the unit will not operate properly.
To maintain high sound quality
Do not splash liquid onto the unit or discs.
Back | Marker |
Mirror | Notes on LCD panel |
1
•Do not wet the LCD panel or expose it to
2 | liquids. This m y cause a malfunction. |
| 3 |
winauto5 – 45 ºC (41 – 113 ºF). | |
Turn off engine but keep the key in the “IGN” position. | Line Edit |
Displaying marker lines
Touch “Marker.”
Touch “Marker” again hide the marker lines.
Reversing the picture |
|
|
|
| • Do not press on the LCD panel as doing so can | ||||
Touch “Mirror.” |
|
|
|
| distort the picture or cause a malfunction (i.e., the | ||||
A |
|
| picture may become unclear, or the LCD panel | ||||||
|
|
|
|
|
|
|
|
| may be damaged). |
Editing lines |
|
|
|
| • Do not touch other than with the finger, as it may | ||||
|
|
|
| damage or break the LCD panel. | |||||
|
|
|
|
|
|
|
|
| |
1 Touch “Line Edit.” |
|
|
|
| • Clean the LCD panel with a dry soft cloth. Do not | ||||
|
|
|
|
|
|
|
|
| use solvents such as benzine, thinner, |
| Back |
|
|
|
| commercially available cleaners, or antistatic | |||
|
|
|
|
| spray. | ||||
|
|
|
|
|
|
|
|
| |
| 1 Edit |
|
|
|
|
| • Do not use this unit outside the temperature range | ||
|
| 1 |
|
|
|
| |||
|
|
|
|
|
|
|
|
| |
| 2 Edit |
|
|
| 2 |
|
| • If your car was parked in a cold or hot place, the | |
|
|
|
|
| picture may not be clear. However, the monitor is | ||||
|
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| |
| 3 Edit |
|
|
| 3 |
| not damaged, and the picture will become clear | ||
|
|
|
|
| |||||
|
|
|
|
|
|
|
| after the temperature in your car becomes normal. | |
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| • Some stationary blue, red or green dots may |
| Turn off engine but keep the key in the “IGN” position. |
|
| Reset | appear on the monitor. These are called “bright | ||||
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| spots,” and can happen with any LCD. The LCD |
2 Select the line to edit. |
|
|
|
| panel is | ||||
|
|
|
| 99.99% of its segments functional. However, it is | |||||
Touch “1 Edit,” “2 Edit,” or “3 Edit” |
| ||||||||
| possible that a small percentage (typically 0.01%) | ||||||||
corresponding to the line to edit. |
|
| |||||||
|
| of the segments may not light up properly. This | |||||||
|
|
|
|
|
|
|
|
| |
3 Edit the line. |
|
|
|
| will not, however, interfere with your viewing. | ||||
To increase the length, touch B B. |
|
| |||||||
To reduce the length, touch BB.
To adjust the position, touch V or V.
To restore the default setting, touch “Reset.”
To return to the previous display, touch “Back.” | 47 |
|
