Filename [DR-MH30UJ_10Subsidiary.fm]
Masterpage:Left+
76 EN TROUBLESHOOTING
Page 76 Monday, 12 July 2004 14:10
Other Problems
For AV/S-video connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator ( ) lights off on the front display panel.
For component video connection
]Press PROGRESSIVE SCAN for 3 or more seconds so that the
Video output indicator ( ) lights up on the front display panel.
●The camcorder’s microphone is too close to the TV.
]Position the camcorder so its microphone is away from the TV.
●The TV’s volume is too high.
]Turn the TV’s volume down.
●Those channels have been designated to be skipped.
]If you need the skipped channels, restore them. (墌pg. 23)
●Recording or Live Memory recording* is in progress.
]Press 9 to pause the recording, change channels, then press 4
to resume recording.
* HDD deck only
●After the manual settings were made, Auto Channel Set was
performed.
]Perform “Manual Clock Set” (墌pg. 22).
●The clock setting data received from the host channel is
incorrect.
]Select a different host channel during “Semiauto Clock Set”
(墌pg. 22), or perform “Manual Clock Set” (墌pg. 22).
On-screen Message
●A disc that is not registered in the library has been inserted.
Register the disc as necessary. (墌pg.56)
●Appears when a title that has been selected in the library is not
contained in the loaded disc.
●Recording and/or editing cannot be performed.
●The number of titles exceeds 99.
●The number of play lists exceeds 999.
●To set the timer program, the clock must be set in advance.
(墌pg. 22)
●You can program this unit to timer-record as many as 32
programs. To program more, you need to cancel a timer program
already set. (墌pg. 49)
●Operation has been attempted when a disc is not loaded, or
loaded upside down. (墌pg. 10)
●When a playback-only disc or a finalized disc is loaded, 7 has
been pressed. (墌pg. 7)
The image of the TV broadcast appears distorted on the TV
screen.
Whistling or howling is heard from the TV during camcorder
recording.
When scanning channels, some of them are skipped over.
The channel cannot be changed.
Channel settings that were made manually seem to have
changed or disappeared.
Even though Auto or Semiauto Clock Set has been performed,
the clock is incorrect.
DISC NOT REGISTERED IN THE LIBRARY
REGISTER DISC?
INSERT DISC XXXX
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
SET CLOCK BEFORE TIMER PROGRAMING
PROGRAM FULL
DELETE UNWANTED TIMER PROGRAMS
DISC NOT LOADED
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
DR-MH30UJ_00.book Page 76 Monday, July 12, 2004 3:17 PM