Masterpage:Right+
EN 79
Filename [MV5SEK_13Subsidiary.fm]
SUBSIDIARY SETTINGS
Page 79Wednesday, 31 August 2005 19:58
RECORDING SET8SAVE AS LIBRARY — OFF / ON
When this function is set to “ON”, the recording information is
automatically stored in the library. For details, refer to “Modify
Library Information” (墌pg.71).
8XP MODE REC AUDIO — DOLBY DIGITAL / LINEAR PCM
You can select the audio format when you record a title in XP
mode. When this function is set to “LINEAR PCM”, you can obtain
a high-quality audio sound.
DOLBY DIGITAL: To record in Dolby Digital format.
LINEAR PCM: To record in Linear PCM format.
8AUDIO REC — NICAM 1/MAIN / NICAM 2/SUB / MONO
You can select the desired NICAM audio channel to be recorded
on a DVD-R/RW (Video mode) disc.
NICAM1/MAIN: To record the main language of NICAM audio.
NICAM2/SUB: To record the sub language of NICAM audio.
MONO: To record the standard (monaural) sound of NICAM audio.
NOTE:
This function works only for the NICAM bilingual programme.
8DIRECT REC — OFF / ON
When this function is set to “ON”, you can easily start recording the
programme that you are watching on your TV. Press and hold 7
and press 4 on the remote control, or press 7 on the unit.
NOTES:
●When you use the Direct Rec function, be sure to use a TV offering
T-V LINK, etc. and connect a fully-wired 21-pin SCART cable
between the unit and the TV. (墌pg.15)
●If “DIRECT REC” is set to “OFF”, the 7 button functions as described
in “Basic Recording (DVD)” (墌pg.26) or “Basic Recording (VHS)”
(墌pg.28).
●During Direct Rec, “–– ” appears on the front display panel.
●If a programme is recorded with the Direct Rec, the station name will
not be registered in the library. “––––” will be displayed for the
station name.
●Even if there is no power supply for more than 60 minutes, the unit
keeps the setting.
DISPLAY SET8SUPERIMPOSE — OFF / AUTO
When this function is set to “AUTO”, various operational indicators
appear on the TV screen.
OFF: To turn off superimposed indications.
AUTO: To superimpose operational indications for approximately
five seconds just after the corresponding operation.
NOTES:
●Even when “SUPERIMPOSE” is set to “OFF”, you can display the
various operational indicators by pressing ON SCREEN. To clear the
operational indicators, press ON SCREEN again.
●When you use this unit as the source player for editing, be sure to set
“SUPERIMPOSE” to “OFF” before starting.
●When you select “AUTO”, during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
8GREY/BLUE BACK — OFF / ON
When this function is set to “ON”, the TV screen becomes all grey
(DVD deck)/blue (VHS deck) when receiving a channel not in use.
NOTE:
When you want to receive an unstable channel with poor signals, set
this function to “OFF”.
8DIMMER — BRIGHT / DIMMED1 / DIMMED2 / OFF
You can change the brightness of the front display panel.
BRIGHT: To turn on the light on the front display panel. (Blue lamp
on the front display panel is turned on.)
DIMMED1/DIMMED2: To change the brightness level. (Blue lamp
on the front display panel is turned off.)
OFF: To turn off the light on the front display panel. (Blue lamp on
the front display panel is turned off.)
8POWER SAVE — OFF / ON
When this function is set to “ON”, you can reduce the power
consumption while the unit is turned off.
●During Power Save mode—
—the front display panel will be turned off.
—the Just Clock function (墌pg. 88) does not work.
●Power Save does not work when—
—the unit is in the Timer mode.
—the unit’s power is turned off after timer-recording or Instant Timer
Recording.
—“L-2 SELECT” is set to “DECODER” or “SAT VIDEO/RGB”. (墌pg. 45)
●It takes some time for the unit to complete initialisation after you turn
on the unit power, with “HELLO” blinking on the front display panel.
MV5SEK_00.book Page 79 Wednesday, August 31, 2005 7:58 PM