JVC DR-MV5BEK, DR-MV5SEK manual Recording DVD Deck Only, REC Mode

Filename [MV5SEK_08Basic TimerDub.fm]
MV5SEK_00.book Page 36 Wednesday, August 31, 2005 7:58 PM	Masterpage:Left+

36 EN TIMER RECORDING

	Automatic Satellite Programme	● Make sure the satellite receiver is connected to the unit’s [L-2 IN/
		DECODER] connector.
	Recording (DVD Deck Only)	● Programme the timer on the satellite receiver.
		● Slide the TV/DVD switch to DVD.
		1 Load a recordable disc.
This function allows you to automatically record a satellite
programme which is timer-programmed on your external satellite		2 Press DVD so that the DVD lamp lights up on the unit.
receiver. Connect a satellite receiver to the unit’s [L-2 IN/		3 Press REC MODE repeatedly to set the recording mode.
DECODER] connector and programme the timer on the satellite
		4 Press and hold SAT # for about 2 seconds to engage the
receiver. The unit starts or stops recording by the signals input
from the satellite receiver. After recording, the unit’s power shuts		Automatic Satellite Programme Recording mode. “SAT #” appears
off automatically.		on the front display panel.
		NOTES:
ATTENTION:
		● To disengage the Automatic Satellite Programme Recording mode,
● When you record programmes by connecting to a digital terrestrial		press SAT #.
	receiver (Freeview receiver or similar), perform the same steps as	● If the unit’s power is off, it is not possible to engage the Automatic
	“Automatic Satellite Programme Recording (DVD Deck Only)”	Satellite Programme Recording mode.
	( pg. 36).	● For timer programming of the satellite receiver, refer to the instruction
● Be sure not to turn on the satellite receiver before the programme		manual of the satellite receiver.
	is executed; otherwise, the unit will start recording when the	● Automatic Satellite Programme Recording is not possible if your
	satellite receiver’s power is turned on.	satellite receiver does not have a timer.
● If you have connected another appliance other than a satellite		● Pressing the unit’s 1 button while Automatic Satellite Programme
	receiver to the [L-2 IN/DECODER] connector, be sure not to	Recording is in progress turns off the unit’s power and disengages
	engage the Automatic Satellite Programme Recording mode;	the Automatic Satellite Programme Recording mode.
	otherwise, the unit will start recording when the connected	● If there are more than one satellite programmes you wish to record
	appliance’s power is turned on.	with Automatic Satellite Programme Recording, it is not possible to
● Automatic Satellite Programme Recording and timer-recording		set different recording modes for each programme.
	cannot be done at the same time.	● Depending on the type of satellite receiver, the unit may not record a
		slight portion of the beginning of the programme or may record
		slightly longer than the actual length of the programme.
		● Just Clock ( pg. 88) does not work when the Automatic Satellite
		Programme Recording mode is engaged.
		● You can also record a programme from your cable system in the
		same way if the system has a timer.

DVD

SAT

REC MODE

Page 36Wednesday, 31 August 2005 19:58