JVC DR-MV5SEK, DR-MV5BEK manual When Programmes Overlap Each Other, Cancel Prog Enter, Press Cancel

Filename [MV5SEK_08Basic TimerDub.fm]
MV5SEK_00.book Page 35 Wednesday, August 31, 2005 7:58 PM	Masterpage:Right+

TIMER RECORDING EN 35

When Programmes Overlap Each Other

If “PROGRAMME OVERLAPPED” appears, you have another programme overlapping the programme you have just made. Confirm with the arrow on “OK”, then press PROG. The Programme Check screen appears and conflicting programmes will be highlighted in pink.

CANCEL

PROG ENTER

Example: Programme 3 (you have just made) and programme 4 overlap each other.

1 Confirm the overlapping programmes. Overlapping programmes appear on the TV screen.

NOTE:

VHS	DVD
DATE	START-STOP	TV PROG	DAILY/WEEKLY	VPS/PDC	REC MODE
05/07 SAT	18:10-20:00 L-1			ON	SP
06/01 THU	18:10-20:00 L-1			ON	SP
10/07 THU	19:00-20:00	7	WEEKLY	OFF	XP
10/07 THU	19:45-20:30	7		OFF	LP

++++++++++++++++ NEW TIMER PROGRAMME ++++++++++++++++

DISC TIMER PRGM

EXIT	OK	SELECT WITH [CURSORS]
PROG	SELECT	THEN PRESS [ENTER]

If you do not mind this overlap, press PROG to finish the timer programme setting. The programme whose start time is earlier will be recorded and the other one will not be recorded correctly.

2 Press rt to select the desired programme to be cancelled or changed.

●If programme on the DVD deck and programme on VHS deck overlap each other, mark appears on the left of the date of each item. Press rt w e to select “VHS” or “DVD”, then select the programme to be cancelled or changed.

To cancel the programme

Press CANCEL.

●“THE TIMER PROGRAMMING SETTING WAS CANCELLED” appears on the TV screen for about 5 seconds, then the normal screen resumes.

To change the programme setting

Press ENTER, then go to step 3.

3 Change the programme setting.

●Refer to steps 5 – 10 in “Manual Timer Programming” ( pg. 31).

4 Press PROG to check if the conflict has been settled. The Programme Check screen appears.

5 Engage the unit’s timer mode.

● Refer to step 6 in “Check, Cancel And Change Programmes” ( pg. 34).

NOTE:

When any overlaps remain after deletion and modification of programmes, the Programme Check screen remains showing the conflicting programmes. In such a case, repeat the procedure above until the conflict is solved.

Page 35Wednesday, 31 August 2005 19:58