Filename [MV5SEK_08Basic TimerDub.fm] |
|
MV5SEK_00.book Page 29 Wednesday, August 31, 2005 7:58 PM | Masterpage:Right0 |
|
TIMER RECORDING EN 29
VIDEO Plus+ Timer Programming | 1 Press DVD or VHS to select the deck on which you want to |
perform timer programming. | |
| 2 For DVD deck |
| |
| Load a recordable disc. |
You can programme each deck to
With the VIDEO Plus+ system, timer programming is greatly simplified because each TV programme has a corresponding code number which your unit is able to recognise.
You can use the remote control to enter the PlusCode number.
●Make sure that the unit’s
●Turn on the unit.
●Turn on the TV and select the AV mode.
●Slide the TV/DVD switch to DVD.
VHS
DVD
0 – 9 
CANCEL 
VIDEO Plus + 
TIMER
ENTER 
RETURN
CLEAR ( 
)
IMPORTANT:
If you have moved to a different area or if a broadcasting station’s channel number has been changed, the wrong channel number will be displayed on the VIDEO Plus+ programme screen in step 5. When this happens, set the correct Guide Program number for that station. ( pg. 83, “VIDEO Plus+ System Setup”)
For VHS deck |
|
|
|
|
Load a cassette with safety tab intact. |
|
|
| |
3 Press VIDEO Plus+ to access the VIDEO Plus+ screen. |
| |||
4 Press the number buttons to | VIDEO Plus+ PRGM |
|
|
|
enter the PlusCode number of a | PLUSCODE NO. | 1 2 3 4 |
|
|
programme you wish to record, | DATE | START | STOP | TV PROG |
then press ENTER. |
|
|
|
|
● If you have made a mistake, press |
| DAILY/WEEKLY VPS/PDC | REC MODE | |||
CANCEL and input the correct |
|
|
| ON | NAME | |
|
|
| SP | |||
number before you press ENTER. | 1 | 2 | 3 | OK | ENTER PLUSCODE NO. WITH | |
● To clear all entered numbers at a | ||||||
4 | 5 | 6 | ||||
| THEN PRESS [ENTER] | |||||
7 | 8 | 9 |
| |||
time, press CLEAR (8). |
| 0 |
|
|
| |
|
|
|
|
| ||
●If the number you entered is
invalid, “PLUSCODE NO. ERROR CONFIRM PLUSCODE NO. THEN RETRY” appears on the TV screen. Input a valid PlusCode number.
●If “GUIDE PROGRAMME IS NOT SET” appears on the TV screen, set Guide Program numbers manually. ( pg. 83)
●When “PROGRAMME FULL DELETE UNWANTED TIMER PROGRAMME” appears on the TV screen, you need to cancel some of the reserved programmes. ( pg. 34)
5 The PlusCode number you entered and the matching timer- recording information are displayed on the TV screen. Check the programme data.
●To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is displayed; if not, see “VIDEO Plus+ System Setup” ( pg. 83) and set the Guide Program number correctly.
6 Press w e to select the desired recording option as required. Press rt to select the desired setting, then press ENTER.
●“STOP” (To advance/go back the stop time by 30 minutes, press and hold rt).
●“DAILY/WEEKLY” ( pg. 30, “Weekly/Daily Recording”)
●“VPS/PDC” ( pg. 30, “PDC Recording”)
●“REC MODE” ( pg. 27, 28, “Recording Mode”)
●“NAME” ( pg. 67, “Modify Title Name”) (DVD deck only)
7 Press ENTER to access the Programme Confirmation screen.
8 Press ENTER to complete timer programming.
●To programme another timer, repeat steps 3 – 8.
●If “PROGRAMME OVERLAPPED” appears on the TV screen, see page 35.
9Press TIMER # to engage the unit’s timer mode. The DVD timer indicator lights up on the unit and the unit is automatically turned off.
Satellite Receiver Users (DVD Deck Only)
To
APerform “VIDEO Plus+ Timer Programming”.
BSet the satellite receiver to the appropriate channel before the selected programme begins.
C Leave the satellite receiver’s power on.
NOTES:
●To disengage the timer mode, press TIMER # again.
●There may be cases that the VIDEO Plus+ Timer Programming function prolongs the stop time of the programming.
●When two successive programmes are recorded on a
●SHOWVIEW Timer Programming is not possible on the discs used exclusively for
●If the copy limited programme is received during
●To record the programmes received by the satellite receiver, record on the DVD discs. For details, refer to “Satellite Receiver Users (DVD Deck Only)” above.
Page 29Wednesday, 31 August 2005 19:58 |
