Daily Operations (cont.)

6MENU button

Activates/deactivates the display of the MAIN MENU (☞ “Menu Operations” on page 13).

7COLOR OFF button/lamp

Displays only the luminance signal.

●This function does not work for RGB input signals.

81:1 button/lamp

Displays the picture in the original resolution of the input signal.

●The aspect ratio of the picture may change depending on the input signal.

9AREA MARKER button/lamp

Displays/hides the area marker.

●Select the style of the area marker in “MARKER” of the MAIN MENU (☞ page 15).

●This function does not work when displaying the picture in the 1:1 mode.

●This function works only when displaying the picture in 16:9 aspect ratio.

●This function does not work when “AREA MARKER” or “R-AREA MARKER” is set to “OFF” in “MARKER.”

pSAFETY MARKER button/lamp

Displays/hides the safety marker.

●Adjust the area of the safety marker in “MARKER” of MAIN MENU (☞ page 15).

●This function works only when displaying the picture in 16:9 aspect ratio.

●This function does not work when “SAFETY MARKER” or “R- SAFETY MARKER” is set to “OFF” in “MARKER.”

qSCREENS CHECK button/lamp

Displays only the selected element (R, G, or B) of the video signal. ● This function does not work for RGB input signals.

● Each time you press this button, the picture changes in the following order.

RGB (Normal screen)

Red screen

Blue screen

Green screen

wASPECT button/lamp

Changes the aspect ratio of the picture from 4:3 to 16:9 when the picture of 16:9 aspect ratio is squeezed into 4:3 format signal.

●To return to 4:3, press the button again.

●This function does not work when displaying the picture in the 1:1 mode.

eSCOPE button/lamp

Displays/hides the indication of the wave form monitor and vector scope (☞ “SCOPE SETTING” on page 17).

●Each time you press this button, the window changes in the following order.

No display

Wave form monitor

Vectorscope

rT.C. (time code) button/lamp

Activates/deactivates the display of the time data (time code) contained in the SDI signal (☞ “On the Information Display” on page 11).

●Select the time code type in “INFORMATION” of SET-UP MENU (☞ page 21).

tINPUT SELECT buttons/lamps

Selects an input.

SDI 1:Input from the E. AUDIO 3G SDI/HD SDI/

SD SDI (IN 1) terminal

SDI 2:Input from the E. AUDIO 3G SDI/HD SDI/

SD SDI (IN 2) terminal

DUAL LINK: Input from the E. AUDIO 3G SDI /HD SDI/ SD SDI (IN 1, IN 2) terminals

DVI:Input from the DVI-D (HDCP) terminal

COMPO.: Input from the COMPO. terminals

VIDEO: Input from the VIDEO terminal

●The lamp for the selected input lights.

yPower lamp

Off:The power is turned off

Green: The monitor is on

Orange: The monitor is turned off (standby)

Orange blinking: P.SAVE (Power saving) mode (“NO SYNC ACTION“ in “SYNC FUNCTION“) (☞ page 17)

u button

Turns on and off (on standby) the monitor.

●The AC power switch is equipped on the rear panel of the monitor (☞ 2 on page 8).

10