INFORMATION
Settings for the information display of the monitor.
Item | Content | Setting value |
| POSITION | Select the position to show the information display (☞ “On the | UPPER |
| Information Display” on page 11). | LOWER |
| SOURCE ID | Select whether the name assigned in “CHARACTER SET.” is displayed on | OFF |
| the screen (☞ “On the Information Display” on page 11). | ON |
| • When “AUTO” is selected, the display color synchronizes with the color | AUTO |
| of the tally lamp while the tally lamp is lit. |
|
| CHARACTER SET. *1 | Assign a name to each video source as you like (10 characters at maximum). |
|
| You can also enter a name using the |
|
1Change the input to one that you want to assign a video source
name for.
2Select “CHARACTER SET.”
3Press the 
buttons to select a character to enter at first.
●Each time you press the 
button, the characters change in the following order. Press 
button to reverse the order.
space
|
| 4 Press button to move the arrow to the next space. |
|
|
|
|
|
|
| |
|
| ● The characters entered before moving the arrow are memorized. |
|
|
|
|
|
|
| |
|
| 5 Repeat steps 3 and 4 (10 characters at maximum). |
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| ||
|
| 6 Press MENU button to store the name. |
|
|
|
|
|
|
| |
| STATUS DISPLAY | Select whether the status of the current input and the setting of MUTING |
| AUTO, OFF, ON | |||||||
|
| are displayed on the screen (☞ “On the Status Display” on page 12). |
|
|
|
|
|
|
|
|
| TIME CODE | Select the type of the TIME CODE display. |
| VITC *2, LTC *2, | |||||||
| CRC ERROR | Select whether the CRC error indication for the input HD SDI/SD SDI signal |
| OFF | |||||||
|
| is displayed on the screen (☞ “On the Information Display” on page 11). |
| ON | ||||||
| SUB HOUR METER | Display the hours of use (unit: hour). |
|
|
|
|
|
|
| ||
|
| You can reset this item. |
|
|
|
|
|
|
| |
| MODEL | Display the model name of the monitor. |
|
|
|
|
|
|
| ||
| VERSION | Display the version of the monitor. |
|
|
|
|
|
|
| ||
| HOUR METER | Display the total hours of use (unit: hour). |
|
|
|
|
|
|
| ||
|
| This item is used for maintenance of the monitor. You cannot reset this item. |
|
|
|
|
|
|
| |
*1 | Memorized for each input. |
|
|
|
|
|
|
|
|
|
*2 | Ancillary time code |
|
|
|
|
|
|
|
|
|
all reset
Restores all the settings and adjustments of the monitor to the default.
●“HOUR METER” and the settings done by using the adjustment knobs on the front panel will not be reset.
●If reset while the AC power is on, the monitor turns off (standby), and then turns on automatically.
21