Specifications
General
| Model name |
|
|
| ||
| Type | MULTI FORMAT LCD MONITOR |
| |||
| Screen size | Type 21 wide format |
|
|
| |
| Aspect ratio | 16:9 |
|
|
|
|
| Compliant video signal format | ☞ “Available signals” on page 29 |
| |||
| Format | 3G SDI |
| : | SMPTE424M/SMPTE425M | |
| DUAL LINK HD SDI | : | SMPTE372M |
| |
| HD SDI |
| : | BTA | |
| SD SDI |
| : | 525/625 | |
| EMBEDDED AUDIO | : | SMPTE259M: | 525 | |
| SMPTE299M, SMPTE272M | ||||
| Audio output | Internal speaker: 1.0 W + 1.0 W |
| |||
| Operation environment | Operating temperature: 5°C – 35°C (41°F – 95°F) |
| |||
| Operating humidity: 20% – 80% | ||||
| (Slightly variable depending on ambient conditions for installation.) | ||||
| Power requirements | AC 120 V/AC 220 – 240 V, 50 Hz/60 Hz |
| |||
|
|
|
|
| |
| Rated current | 0.6 A (AC 120 V) |
|
|
| |
| 0.4 A (AC 220 – 240 V) |
|
|
| |
External dimensions (excluding protruding |
| with the stand |
|
| without the stand |
| parts) | Width: | 515 mm (20 3/8˝) |
| 515 mm (20 3/8˝) | |
| Height: | 387.8 mm (15 3/8˝) (High) | 347 mm (13 3/4˝) | ||
|
| 352.5 mm (14˝) (Low) |
| ||
| Depth: | 199 mm (7 7/8˝) |
|
| 99.8 mm (4˝) |
| Mass | 7.9 kg (17.4 lbs) (with the stand) 6.1 kg (13.4 lbs) (without the stand) | ||||
| Accessories | AC power cord × 1, Power cord holder × 1, Screw × 2 (for power cord holder) | ||||
LCD panel
Type | 21˝ wide, active matrix TFT |
| Effective screen size | Width: 475 mm (18 3/4˝) Height: 267 mm (10 9/16˝) Diagonal: 545 mm (21 1/2˝) |
| Number of pixels displayed | 1920 × 1080 |
| Number of colors displayed | 16.70 million |
| Contrast ratio (TYP.) | 1000:1 |
|
|
Input/output terminals
| ||
|
|
|
| E. AUDIO 3G SDI/HD SDI/SD SDI (IN 1) | Digital signal input (compatible with EMBEDDED AUDIO/DUAL LINK signals): |
| E. AUDIO 3G SDI/HD SDI/SD SDI (IN 2) | Auto detection, 2 line, BNC connector x 2 |
| E. AUDIO 3G SDI/HD SDI/SD SDI | Digital signal output (compatible with EMBEDDED AUDIO signals): |
| (SWITCHED OUT) | 1 line switched out, BNC connector x 1 |
Video | VIDEO | Input/output of composite signal: |
| 1 line, BNC connector x 2, | |
|
| |
|
| 1 V |
|
| * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). |
| COMPO. (Y, | Input/output of analog component signal: |
|
| 1 line, BNC connector x 6 |
|
| Y: 1 V |
|
| |
|
| * The input (IN) and output (OUT) terminals are bridgeconnected (auto termination). |
| Audio | AUDIO (IN) | Analog audio signal input: 1 line, RCA connector x 2, 500 mV (rms), high impedance |
|
| |
| AUDIO (MONITOR OUT) | Analog audio signal output: 1 line, RCA connector x 2, 500 mV (rms) | |
|
|
|
control | REMOTE (MAKE/TRIGGER) | ☞ “Using the MAKE/TRIGGER system” on page 22 |
| ||
|
|
|
External | REMOTE | ☞ “Using the serial communication” on page 24 |
| REMOTE | ||
|
| |
|
|
|
28