Daily Operations
Front panel
Tally lamp
This lamp is controlled by the tally function of the MAKE/TRIGGER terminal.
•You can select the color of the tally lamp from “GREEN” or “RED.”
(☞ “TALLY SELECT” in “FUNCTION SETTING” on page 18 and “External Control” on page 22)
•“NO EFFECT” is displayed when you press a button which is not available for the current input or signal format (the lamp lights even when the function does not actually work).
•You cannot use the buttons for the items controlled by the MAKE system (“REMOTE ON” appears, and the lamp does not light up).
1Speakers (stereo)
The speakers emit the same audio signal emitted from the AUDIO (MONITOR OUT) terminals.
(☞ 7 “AUDIO MONITOR OUT (OUT 1, OUT 2) terminals (pin jack)” on page 8)
2VOLUME adjustment knob
Adjusts the volume.
3Picture adjustment knob
PHASE: Adjusts the picture hue.
CHROMA: Adjusts the picture color density.
BRIGHT: Adjusts the picture brightness.
CONTRAST: Adjusts the picture contrast.
●PHASE and CHROMA cannot be adjusted for certain signal formats.
●When “COMPONENT PHASE” is set to “DISABLE” and an NTSC signal is input, PHASE can be adjusted (☞ page 18).
4MUTING button
Turns off the sound when no menu screen is displayed (Muting).
●To cancel the function, press the button again or turn the VOLUME adjustment knob.
●Muting function is also canceled when “BALANCE” of “AUDIO SETTING” in the MAIN MENU is changed (☞ page 16).
5
/ 
/ 
/ 
buttons
When a menu screen is displayed
Selects or adjusts menu items (☞ “Menu Operations” on page 13).
When no menu screen is displayed
Selects the audio channels of EMBEDDED AUDIO signals (☞ “Audio Channel Selection” on page 11).
●Pressing 
button while holding 
button displays the
9