Audio Channel Selection
Select audio channels emitted from the speakers (L/R) and the AUDIO MONITOR OUT(OUT1(L)/OUT2(R)) terminals, when EMBEDDED AUDIO signals come in to the SDI terminal and SDI input is selected.
●You have to choose a group of selectable audio channels before the channel selection (☞ “E.AUDIO GROUP” in “AUDIO SETTING” on page 16).
●The setting is memorized for each input (SDI 1 and SDI 2).
1Press 
or 
button when a menu is not displayed.
The screen for audio channel selection is displayed.
●The screen for audio channel selection automatically disappears in about 30 seconds after the previous operation. Audio channel selection screen
Selected item
2Press 
buttons to select the left (L ch) or right (R ch).
3Press 
buttons to select an audio channel.
● Each time you press the button, the audio channel changes according to the settings of “E.AUDIO GROUP.” (☞ page 16)
4Press MENU button.
● The screen for audio channel selection disappears.
On the Information Display
The monitor displays the information below.
●Configure the show/hide setting of each item in the menu. Use the T.C. button (☞ r on page 10) to configure 5 and 6.
●Select the position of the information display (☞ “POSITION” in “INFORMATION” on page 21).
1Audio level meter
●You can check the conditions of the EMBEDDED AUDIO signals when “LEVEL METER ch” is set to “LINE” or “DIVIDE.”
●Not displayed when “LEVEL METER ch” is set to “OFF.” (☞ “AUDIO SETTING” on page 16)
2Signal format
●Displayed when “STATUS DISPLAY” is set to “ON.” (☞ “INFORMATION” on page 21)
●For the contents displayed, see “Available signals” on page 29 and “On the signal format” on page 12.
3Source name assigned in “CHARACTER SET.”
●Displayed when “SOURCE ID” is set to “ON” or “AUTO.”
●Displayed in large letters when “STATUS DISPLAY” is set to “OFF” or “AUTO.” (☞ “INFORMATION” on page 21)
4CRC error indication
●Displayed when “CRC ERROR” is set to “ON.” (☞ “INFORMATION” on page 21)
●A red square is displayed when an error occurs.
5Time code
● When the input signal includes no time code, “TC –
11