Setting the menu (cont.)
SET-UP MENU
FUNCTION SETTING
Configure the sub menu display, the lighting color of the tally lamp, the size of images, the brightness of the button lamps.
Item | Content |
|
| Setting value | ||
sub menu POSI. | Select the contents and displaying position of “sub menu.” | LOWER1 | ||||
|
|
| The setting values and features are as follows. | UPPER1 | ||
|
|
| LOWER1 | : | Displays the current setting and adjustment bar at the lower part of the | LOWER2 |
|
|
| UPPER1 | : | screen. | UPPER2 |
|
|
| Displays the current setting and adjustment bar at the upper part of the |
| ||
|
|
| LOWER2 | : | screen. |
|
|
|
| Displays the current setting at the lower part of the screen. |
| ||
|
|
| UPPER2 | : | Displays the current setting at the upper part of the screen. |
|
|
|
| • The adjustment bar is not displayed for some items. |
| ||
COLOR SYSTEM | Select the color system. | AUTO, NTSC, PAL | ||||
|
|
| • If the picture is unstable with “AUTO,” select “NTSC” or “PAL.” |
| ||
COMPONENT PHASE | Deactivates the function of PHASE adjustment (Picture adjustment knob and “PICTURE SUB | ENABLE, DISABLE | ||||
|
|
| ADJ.” in |
| ||
TALLY SELECT | Select the color of the tally lamp. | GREEN, RED | ||||
DIMMER | Select the intensity of the button lamps. | NORMAL, DARK | ||||
LCD SAVER | Set for reducing the burden on the LCD panel when it is used for a long time. |
| ||||
| EXECUTE | Activate the function of the LCD SAVER. |
| |||
| SETTING | 1st START | Set the Standby time. | |||
|
| WORK TIME | Set the time for operating the function. | |||
|
| CONTRAST | Set the reduction of the picture contrast. | SAVE, NORMAL | ||
|
| BACKLIGHT | Set the reduction of the BACKLIGHT brightness. | SAVE, NORMAL | ||
|
| OSD CONT. | Set the reduction of the OSD display contrast. | SAVE, NORMAL | ||
|
| SIDE MASK | Set use or nonuse of the side panel. | OFF, ON | ||
|
|
| * The "SIDE MASK" function can operate irrespective of running/cancelling the LCD SAVER |
| ||
|
|
| function. |
|
|
|
|
| reset | Reset the LCD SAVER SETTING configuration to the status when it was initially purchased. |
| ||
| CANCEL | Cancel the LCD SAVER function. ("CANCEL" will not be displayed during the function stop.) |
| |||
| STATUS | Display the LCD SAVER function status. | OFF, READY | |||
| START AFTER | Display required time until the LCD SAVER operation starts. | **h**min. | |||
●How to use the LCD SAVER
1.Set reduced function to perform.
2.Set both time for starting the function and time for letting it work.
3.Activate the STANDBY MODE by EXECUTE.
■Aborting the ongoing function operation
Operating this apparatus may lead to aborting the OPERATION MODE.
■Stopping the operation
Executing "CANCEL". Turn off the power.
●Once operating the function, unless turned off the power or executed "CANCEL", reduced function is automatically performed every 24 hours.
■Example of setting up "1st START" and "WORK TIME"
0h | 2h | 4h | 6h | 8h | 10h | 12h | 14h | 16h | 18h | 20h | 22h | 24h | ||||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| LCD SAVER in |
|
| LCD SAVER in |
|
|
|
|
|
| LCD SAVER in |
|
|
|
|
|
| ||||||||||
|
| Standby |
|
|
|
| Operation |
|
|
|
|
|
| Standby |
|
|
|
|
|
| ||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Time to set in the 1st START
Time to set in
WORK TIME
Timing to run "EXECUTE"
18