You can install the monitor on a shelf etc. by changing the position of the bottom plate of the stand to a rearward position.
CAUTION
●Lay the monitor on a cloth with the LCD panel facing down to prevent the LCD panel from being damaged.
●When you change the position of the bottom plate of the stand, be sure to install the monitor using screws (not provided).
1 Remove the bottom plate of the stand from the stand body.
Screw holes for the normal position
Bottom plate
2 Remove the bottom plate of the stand from the stand body.
Screw holes for the rearward position
3 Be sure to fix the bottom plate using screws (not provided). Use two holes or more on one side and four holes (6 – ø 8) or more on both sides of the bottom plate of the stand.
Unit: mm (inch) | 233 (9 1/4˝)) | |
149 (5 7/8˝) |
| |
| 53.1 | |
|
| |
| 20.6 (7/8˝) | (2 1/8˝) |
|
| |
|
|
| 54 (2 1/4˝) |
| 140 (5 5/8˝) | 210 (8 3/8˝) |
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Screw hole (6 – ø 8)
34 (1 3/8˝)
CAUTION
Be sure to install the monitor on the shelf etc. using screws. Otherwise, the monitor may topple over or fall down, leading to injury, electric shock, or other hazards.
7