JVC DT-V21G11Z MAIN MENU, PICTURE FUNCTION, BACK LIGHT, 3G SDI LEVEL B, SDI DUAL LINK, CLOSED CAPTION (U.S.A. only)

Setting the menu (cont.)

Setting for the picture quality.

Item	Content	Setting value

*APERTURE 1**	Activates/deactivates the function at the level set in “APERTURE LEVEL.”	OFF, ON
*APERTURE LEVEL 1**	Simultaneously corrects the frequency characteristics of the RGB colors.	01 – 10
CTI	Adjust the clearness of the outlines of the chrominance signal.	OFF, NORMAL, HARD
LTI	Adjust the clearness of the outlines of the luminance signal.	OFF, NORMAL, HARD
I/P MODE	Selects a proper mode corresponding to the input picture.	NORMAL, CINEMA, FIELD

sub menu	Display the sub menu which enables you to adjust the items of “PICTURE FUNCTION” while viewing the actual picture.
reset	Restore the default settings for all the items in “PICTURE FUNCTION.”

*1 Memorized for each input.

BACK LIGHT Setting value: -20 – +20

Adjusts the brightness of the display.

3G SDI LEVEL B Setting value: DS1, DS2

Selects the data stream from two HD SDI signals multiplexed when a 3G SDI LEVEL B signal comes in.

●The setting value will be invalid if a 3G SDI LEVEL B DUAL LINK signal is input.

SDI DUAL LINK Setting value: OFF, ON

Activates/deactivates the DUAL LINK function of SDI signals.

●“DUAL LINK” is displayed when the setting is set to “ON.” (☞ “Status indication of DUAL LINK/3G SDI signal information” on page 12)

●Set this setting to “OFF” when an SDI signal other than DUAL LINK SDI is input.

Setting for the display of CLOSED CAPTION.

Item	Content	Setting value

CLOSED CAPTION	Set the display of CLOSED CAPTION.	OFF, ON

DATA FORMAT	Set the DATA FORMAT of CLOSED CAPTION when an SDI signal is input.	708, 608ANC, 608(708), 608VBI
	(This item is not displayed except when the SDI signal is input.)
DECODE CH	Set DECODE (display) CH.	CC1, CC2, CC3, CC4, TEXT1, TEXT2,
		TEXT3, TEXT4

		Only when the setting value of DATA
		FORMAT is converted to 708:
		SERV.1, SERV.2, SERV.3, SERV.4,
		SERV.5, SERV.6