JVC DT-V21G11Z Dimensions, Specification of the DVI-D(HDCP) terminal, <Front view, <Side view, <Rear view

Specifications (cont.)

Computer signals (preset)

DVI-D (HDCP) terminals

No.	Signal name	Resolution		Frequency		Scan system
		Horizontal	Vertical	Horizontal (kHz)	Vertical (Hz)
1	VGA60	640	480	31.5	59.9	Non-interlace
2	WVGA60	852	480	31.5	59.9	Non-interlace
3	SVGA60	800	600	37.9	60.3	Non-interlace
4	XGA60	1024	768	48.4	60.0	Non-interlace
5	WXGA (1280)	1280	768	47.8	60.0	Non-interlace
6	WXGA+60	1440	900	55.9	60.0	Non-interlace
7	SXGA60	1280	1024	64.0	60.0	Non-interlace
8	WSXGA+60	1680	1050	65.2	60.0	Non-interlace
9	UXGA60 *1	1600	1200	75.0	60.0	Non-interlace
10	WUXGA60 *1	1920	1200	74.0	60.0	Non-interlace
11	720/60p	1280	720	45.0	60.0	Non-interlace
12	1080/60p	1920	1080	67.5	60.0	Non-interlace
13	720/50p	1280	720	37.5	50.0	Non-interlace
14	1080/50p	1920	1080	56.25	50.0	Non-interlace

*1 In 1:1 mode, the top and bottom of the screen will be hidden.

●Even for a preset signal, picture may not be normally displayed depending on the signal timing.

●When a preset signal comes in, the signal format is shown on the status display. For other signals, the resolution is shown.

Specification of the DVI-D (HDCP) terminal

Connect it to the DVI-D output terminal on a personal computer.

Pin No.	Input signal	Pin No.	Input signal	Pin No.	Input signal
1	T.M.D.S Data 2–	9	T.M.D.S Data 1–	17	T.M.D.S Data 0–
2	T.M.D.S Data 2+	10	T.M.D.S Data 1+	18	T.M.D.S Data 0+
3	T.M.D.S Data 2 shield	11	T.M.D.S Data 1 shield	19	T.M.D.S Data 0 shield
4	NC	12	NC	20	NC
5	NC	13	NC	21	NC
6	DDC Clock	14	+5 V Power	22	T.M.D.S Clock shield
7	DDC Data	15	GND	23	T.M.D.S Clock+
8	NC	16	Hot Plug Detect	24	T.M.D.S Clock–

Dimensions	Unit: mm (inch)
<Front view>	<Side view>	<Rear view>
	99.8 (4˝)
	53 (2 1/8˝)	VESA mounting holes
	1.3 (1/16˝)	100 (Size: 4-M4, depth: 10 mm)
515 (20 3/8˝)
387.8 (15 3/8˝) (High)/ 352.5 (14˝) (Low) 347 (13 3/4˝)		115 (4 5/8˝) 100
	20 (7/8˝)

240 (9 1/2˝) 199 (7 7/8˝)

30