JVC GET0467-001A manual Maintenance

ENGLISH

External component operations

You can connect an external component to the AUX (auxiliary) input jack on the control panel.

~

ŸTurn on the connected component and start playing the source.

!Adjust the volume.

⁄Adjust the sound as you want. (See page 13.)

To check other information while listening to an external component

Clock ÔAUX IN

Maintenance

How to clean the connectors

Frequent detachment will deteriorate the connectors. To minimize this possibility, periodically wipe the connectors with a cotton swab or cloth moistened with alcohol, being careful not to damage the connectors.

Connector

Moisture condensation

Moisture may condense on the lens inside the unit in the following cases:

•After starting the heater in the car.

•If it becomes very humid inside the car.

Should this occur, the unit may malfunction. In this case, eject the disc and leave the unit turned on for a few hours until the moisture evaporates.

How to handle discs

When removing a disc from its	Center holder
case, press down the center holder
of the case and lift the disc out,
holding it by the edges.

•Always hold the disc by the edges. Do not touch its recording surface.

When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up).

• Make sure to store discs into the cases after use.

16